ViewSonic VS11857 manual Connecting, Power Supply

Page 11

CONNECTING

Observe the following instructions to connect your LCD display properly:

POWER SUPPLY

•Do not open the power supply housing. An open housing

presents a lethal hazard from electrical shock. There are no parts inside to be cleaned or serviced.

•Operate your LCD display only with grounded outlets with AC 100-240V~/50-60 Hz. If you are not sure about the power supply at your location, check with your power company.

•Use only the power supply and power connection cable provided.

•For additional safety we recommend use of a surge protector to protect your LCD display from damage resulting from voltage surges or lightning.

•To remove the LCD display from the power supply, disconnect the plug from the AC outlet.

•The power outlet must be in the vicinity of your LCD display and within reach of the power cables. DO NOT stretch the power cables tightly to reach a power outlet.

•You should arrange the LCD display cables in a manner that no one can trip over or step on them.

•To avoid damage of cable do not place any objects or furniture on the cable.

ViewSonic

CD3200

8

Image 11

Contents ViewSonic Contents Customer Support Limited Warranty Following information is only for EU-member states For CanadaCE Conformity for European Countries Important Safety Instructions Declaration of RoHS Compliance Product disposal at end of product life Copyright InformationViewSonic Safety and PrecautionsOperating Safety Repair Environmental Conditions Point of USEPower Supply ConnectingPrecautions Advantages in relation to CRT cathode ray tube displays ServicePerformance Characteristics IntroductionRS232 Protocal Further featuresIncluded Equipment Interface Connecting External DevicesFunction Key Power indicatorControls and Location Turn The LCD Display OnRemote Control Selecting the primary signal source Summary of Remote Control ButtonsConnections & Applications How do I connect a Video device via Hdmi Hdmi ? How do I connect a PC via D-SUB ? How do I connect a video device via general cables? Setting the Sleep Timer Using Volume ControlUsing Mute Volume ControlScart button PC/HD buttonVideo button Viewing the Menus and ON-SCREEN Displays Picture Modes Picture SettingHUE Picture SettingsColor Mode ViewSonic OFF mode Sound AdjustmentEqualizer Voice POP Rock Jazz Button ManualFunction Multi ModeViewSonic Press the T button to select PIP Function option PIP FunctionSub Main Language Brightness Darken and brighten picture brightness PC MenuColor Mode Mainpc Suboff Other Functions Remote control does not work TroubleshootingPicture is jittery Analog Input PC Input Preset Timing TableVideo Input SpecificationsItems Specification PanelAudio Input FeaturePower DimensionCustomer Support Limited Warranty ViewSonic Table of contentSet-Function Listing IntroductionDescription Set-Function description Length Command Value1 Value2 Value3Length Command Example Set Mute-ON command AsciiCode Hex PC Set-function command to LCD Monitor ID=C0hCommand Value Range Comments Set FunctionUpright Downleft Down Right Byte Count 00D Bytes order Get-Function ListingGet-Function description Response Range Comments PC Get-function command to LCD MonitorGet Function CD3200 Viii Name Length RCU-Code1 RCU-Code2 Byte Count 00D Bytes order Remote Control Pass-through modeMSB LSB HEX Baseline RCU Pass-through codesSet Function Command Value Range Comments CD3200 RS-232 Command TableSee Table ASPECT/EXITCD3200 Xiii CD3200 Xiv Pass Through Codes