Samsung VP-DX10/XEF Connection, Connecting to a TV, 連接到電視, TV as follows, Viewing on TV screen

connection			連接
You can view the recorded movie and photo images on a large screen by connecting the DVD			您可以透過將 DVD 攝錄放影機連接到電視，以大型螢幕檢視錄製的影片和
camcorder to a TV.			相片影像。
CONNECTING TO A TV			連接到電視
•	To play back your recordings, the television must be PAL					•	要播放錄製內容，電視機必須具備 PAL 相容性。
	compatible. page105	DVD camcorder
					TV		 第 105 頁
•	We recommend that you use the AC power adaptor as the					•
							我們建議您使用交流電源適配器作為 DVD 攝錄放影
	power source for the DVD camcorder.
Use the provided AV cable to connect the DVD camcorder to							機的電源。
a TV as follows:						使用提供的 AV 纜線將 DVD 攝錄放影機連接至電視，如
1.	Connect the end of the AV cable with the single plug to the					下所示：
2.	AV jack of the camcorder.					1.	將帶有單一插頭的 AV 纜線的終端與攝錄放影機的
	Connect the other end with Video (yellow) and left(white)/						AV 插孔連接。
	right(red) audio cables to the TV.					2.	將帶有視訊（黃色）和左（白色）/ 右（紅色）音訊
	• For more information about the connection, refer to the	Signal fl ow					纜線的另一端與電視機連接。
	user manual of the connected device.						• 有關連接的更多資訊，請參閱連接裝置的使用
	• Before connecting, make sure that the volume on TV	AV cable
	is turned down: forgetting this may cause feedback						者手冊。
	from the TV speakers.						• 在連接之前，確保已調低電視音量：忘記調低
	• Carefully connect the input and output cables to the						音量可能會導致電視的喇叭發出迴聲。
	corresponding connections on the device the DVD						• 將輸入和輸出纜線小心連接到與 DVD 攝錄放影
	camcorder is being used with.						機一起使用裝置的連接處。
Viewing on TV screen			在電視螢幕上檢視
1.	Turn on the TV and set the input selector to the Input connection the DVD camcorder is
	connected to.		1.	開啟電視，然後將輸入選擇器設定為連接 DVD 攝錄放影機的輸入連接處。
	- This is often referred to as “line”. Refer to the TV instruction manual for how to switch		2.	-	這通常稱為「線」。參閱電視說明手冊以了解如何切換電視輸入。
2.	the TV input.			開啟 DVD 攝錄放影機。
	Turn the DVD camcorder on.			-	向下滑動	POWER	開關並按下	(	) 按鈕以設定播放模式。
	- Slide the POWER switch downward and press the Play mode (	) button to set					播放
					 第 21 頁
	Play mode. page 21			-	開啟 LCD 螢幕並設定適當的儲存媒體。 第 31 頁
	- Open the LCD screen and set the appropriate storage media. page 31
				-	DVD 攝錄放影機中的影像將會出現在電視機螢幕上。
	- The image from the DVD camcorder will appear on the TV screen.
3.			3.	進行播放。
	Perform playback.
	- You can perform playback, recording or make settings in the menu while viewing on			-	您可以在電視螢幕上檢視時進行播放、錄製或在選單中進行設定。
	your TV screen.

•Adjust the sound volume on TV.

•The remote control is useful when operating the DVD camcorder while viewing an image on TV screen.

•If only a mono audio input is available on the connected device (TV, etc.), use the audio cable with the white jack (Audio L).

•When a copy-protected movie is played back, no image will appear on TV screen.

•When “TV Display” is set to off, OSD(On-Screen-Display) does not appear on the TV screen.

•Information that the DVD camcorder is recording will appear on the TV screen: Press the Display ( ) / iCHECK button to switch the display status. page 26

•Howling may occur when the DVD camcorder is too close to the other devices or the volume is high. Keep the DVD camcorder away from the other connected devices.

50_ English

•調整電視機音量。

•在操作 DVD 攝錄放影機及檢視電視機螢幕影像時，遙控器極有幫助。

•如果連接的裝置（電視等等）上只有單聲道音訊輸入可用，則使用帶有白 色插頭（音訊 L）的音訊電纜線。

•在播放受複製保護的影片時，在電視螢幕上不會出現影像。

•當「TV Display」設定為關閉時，選單不會顯示在電視螢幕上。

•關於 DVD 攝錄放影機正在錄製情況的資訊會出現在電視機螢幕上：按下顯示 ( ) / iCHECK 按鈕以切換顯示狀態。 第 26 頁

•如果 DVD 攝錄放影機太靠近其他裝置或音量很高，則可能會發出尖銳的長鳴聲。請

讓 DVD 攝錄放影機與其他連接的裝置保持一定的距離。 臺灣 _50