Samsung VP-DX10/XEE, VP-DX10/XEF, VP-DX10H/XEF, VP-DX10/XEO Digital Zoom, 請停用 169 寬螢幕模式以使用數位縮放功能。

•The LED light enables you to record a subject in dark places.

•The LED light can be used with C. Nite function onl

•When using C. Nite, the focus adjusts slowly and white dots may appear on the screen, this is not a defect.

•Colour Nite function is not available with the following functions: “Scene Mode(AE),” “Shutter,” “Exposure,” “Digital Zoom,” “Digital Effect (“Emboss2,” Mosaic,” “Mirror,” and “Pastel2”).”

•If Anti-Shake(HIS) is set, C. Nite mode will be released.

•The LED light will not turn on or off while you are recording.

•The range of the LED light is limited. (up to 6.6ft (2m))

•C.Nite function is available only in movie mode.

Digital Zoom

You can select the maximum zoom level in case you want to zoom to a level greater than 26X (the default setting) during recording. Zooming more than 26x is achieved digitally, up to 1200x when combined with optical zoom.

Please disable 16:9 Wide mode to use the Digital Zoom function. page 64

The zooming zone appears when you select the zooming level.

This right side of the bar shows the digital zooming factor. The zooming zone appears when you select the zooming level.

Settings	Contents	On-screen
		display
Off	Up to 26X zoom is performed optically.	None
100x,	Up to 26X zoom is performed optically, and
200x,		None
	after that, up to 100x (200x, 400x, or 1200x) is
400x,
	performed digitally.
1200x

•The image quality may deteriorate depending on how much you zoom in on the subject.

•Maximum zooming may result in lower image quality.

•Digital Zoom is not available while “Anti-Shake(HIS),” “EASY Q,” “C. Nite,” “16:9 Wide,” “Digital Effect” (“Emboss2,” Mosaic,” “Mirror,”and “Pastel2”) is in use.

•Once “C.Nite,” “EASY Q,” “16:9 Wide,” “Digital Effect”(“Emboss2,” Mosaic,” “Mirror,”and “Pastel2”) is selected, Digital Zoom mode will be released. (The Digital Zoom mode will be backed up.)

•Once Anti-Shake(HIS) is selected, Digital Zoom mode will be released.

•This function can be set in movie mode only.

•LED 燈使您能夠在黑暗環境中錄製物體。

•LED 燈只能與彩色夜景配合使用。

•使用彩色夜景時，焦點調整會很慢，而且畫面上可能會出現白點，這不 是缺陷。

•彩色夜景功能不能與下列功能配合使用：「Scene Mode(AE)」，

「Shutter」，「Exposure」，「Digital Zoom」，「Digital Effect」 (「Mosaic」，「Mirror」，「Emboss2」和「Pastel2」)」。

•如果設定了防震，將會釋放彩色夜景。

•正在錄製時，LED 燈將不能開啟或關閉。

•LED 燈的光照範圍有限。（最遠 6.6 英尺（2 米））

•彩色夜景功能只能在影片模式下使用。

Digital Zoom

如果您想在錄製時放大至高於 26X（預設設定）的級別，可選擇最大縮 放桿。26 倍以上的縮放是以數位形式來完成，在結合光學縮放時可進行 高達 1200 倍的縮放。

請停用 16:9 寬螢幕模式以使用數位縮放功能。

在選擇縮放級別時，會顯示縮放範圍。

右列顯示數位縮放比。在選擇縮放級別時，會顯示縮放範圍。

設定	內容	畫面顯示
Off	可透過光學方式執行高達 26X 的縮放。	無
、	可透過光學方式執行高達 26X 的縮放，並透
100x
200x
、	過數位方式執行高達 100x（200x、400x 或	無
、
400x	1200x）的縮放。
1200x

•影像品質可能因為您對主體的放大程度而降低。

•最大程度的縮放可能會導致較低的影像品質。

•在使用防震 (HIS)、簡易拍攝、彩色夜景、16:9 寬螢幕、馬賽克、鏡像、 浮雕 2 或柔和 2 時，不可使用數位縮放。

•選擇彩色夜景、簡易拍攝、16:9 寬螢幕、馬賽克、鏡像、浮雕 2 或柔和 2

後，將解除數位縮放模式。（數位縮放模式將被備份。）

•選擇防震 (HIS) 後，將解除數位縮放模式。

•此功能只能在影片模式中設定。

67_ English 臺灣 _67