PictBridge menu
Setting the date/time imprint option
Touch Menu ( 
) tab “Date/Time” “Off,”
“Date,” “Time,” or “Date&Time” Return (
) tab.
To print using the DPOF setting
If the printer is compatible with DPOF, you can use the DPOF setting. page 91
•If the printer is not recognized, or to print again after direct printing with a PictBridge printer, remove the USB cable, select “PictBridge” in the menu again, then reconnect the cable.
•If the “USB Connect” menu is set to “Mass Storage”, you cannot connect a Pictbridge compatible printer to the camcorder through USB cable. By touching the “Switch Mode” “Pictbridge” on the screen, at this point, you can connect the easy printing mode. In some instances, the DVD camcorder may not connect to the printer, this will depend on the make of the printer. If connection fails, disconnect the USB cable and turn off the printer and back on. Then, connect the USB cable and set the DVD camcorder to “Pictbridge”.
•The date/time option may not be supported by all printers. Check with your printer manufacturer. The “Date/Time” menu cannot be setup if the printer does not support this option.
•The PictBridge™ is a registered trademark of CIPA (Camera & Imaging Products Association), an image transfer standard developed by Canon, Fuji, HP, Olympus, Seiko Epson, and Sony.
•Use the USB cable provided with the DVD camcorder.
•Use the AC power adaptor for your DVD camcorder during PictBridge direct printing. Turning your DVD camcorder off during printing might damage data on the storage media.
•Movie images are not available for printing.
•You can set various printing options depending on the printer. Please refer to the user manual of the printer for details.
•Do not remove USB cable or memory card during printing.
•You may not print photo images recorded on other devices.
1 | Date/Time | ► |
1 / 1
Date/Time
Off
12 Date
1 / 1 | Time |
1 
Date&Time
2007/01/01 12:00
<Printed photo with date/time imprinted>
PictBridge 選單
設定日期 / 時間壓印選項
觸摸選單(
)標籤 「Date/Time」「Off」、「Date」 「Time」或「Date&Time」 返回 (
) 標籤。
使用 DPOF 設定進行列印
如果印表機與 DPOF 不相容，您可以使用 DPOF 設定。 第 91 頁
•如果沒有識別出印表機，或要透過 PictBridge 印表機在直接列印後再次列印，可拔下 USB 纜
線，並在選單中再次選擇「PictBridge」，然後 重新連接纜線。
•如果將「USB Connect」選單設定為「Mass Storage」，您無法透過 USB 纜線將與 Pictbridge 相容的印表機連接到攝錄放影
機。透過觸摸螢幕上的「Switch Mode」
「Pictbridge」，您可以在此連接輕鬆列印模式。 在某些情況下，DVD 攝錄放影機可能無法連接 到列印機，這將視印表機的構造而定。如果連 接失敗，請斷開 USB 纜線並關閉印表機，然
後重新開啟。然後，連接 USB 纜線，並將 DVD 攝錄放影機設定為「Pictbridge」。
•可能不是所有的印表機都支援日期 / 時間選項。 請洽詢您的印表機製造商。如果印表機不支援 此選項，則無法設定「Date/Time」選單。
•PictBridge™ 是 CIPA（相機與影像產品協會）的 註冊商標，是由 Canon、Fuji、HP、Olympus、 Seiko Epson 和 Sony 開發的影像傳輸標準。
•使用 DVD 攝錄放影機隨附的 USB 纜線。
•在 PictBridge 直接列印期間，使用您的 DVD 攝 錄放影機的交流電源適配器。在列印期間關閉 您的 DVD 攝錄放影機可能會損毀儲存媒體上 的資料。