PYLE Audio PLDVD170 operating instructions Radio operation, Radio tuning

Radio operation

		VOL(+,-) button PWR DVD/RADIO button
Front panel operation		OPEN	PWR		MULTI-MEDIA DISC PLAYER RECEIVER
			DVD/RADIO
									ST
Current band		VOL	SKIP	SEEK
FM	ST		BAND	MEMORY	SCAN	STOP	MENU	ENTER	RPT.	AUDIO
		Current
				MUTE
		frequency
Current station		SEEK button
		BAND button				Storing Preset Station
1 Selecting radio mode			MEMORY/MUTE
				SCAN/SEL

Press the DVD/RADIO button less than 1 second to switch from DVD player mode to the radio mode.

DVD player	FM F1 or FM F2 or FM F3 or MW A1 or LW A2
	( the preceding situation)
Each time the BAND button is pressed ,
the selected band changes as shown below		F1	F2	F3	A1	A2
(except in SCAN stations mode)

While playing in FM situation Stereo mode,

the indicator ST on the front panel display illuminates

Press the DVD/RADIO button less than 1 second to switch from the radio mode to DVD player mode.

FM F1 or FM F2 or FM F3 or MW A1 or LW A2	DVD player
( the current situation)
2 Radio tuning

Automatic tuning Select the desired band.

Press the SCAN button on the front panel more than 1 second or the SCAN button on the remote the system will start automatic tuning and play each receivable stations for several seconds, press SCAN button less than 0.5 seconds, stop automatic tuning.

When playing the desired frequency, press MEM button more than 1 second then the number button ( from 1~5) , you can save the station with your desired number.

Selecting stored stations

The MEM(MEMORY) can be used to store 5 stations in each band(FM/MW/LW) for convenient access to your favourite stations.

Select the desired channel (from ch1~ch5),

press one of the 1~5 number buttons on the front panel or on the remote.

Manual tuning

This feature is useful when you want to check the signal strength. 1)Select the desired band.

2)--To quickly scan up or down in frequency, press and hold the SEEK button on the front panel for more than 1 second.

Release the button and the display approaches the desired frequency automatically , --To select frequency finely, each time press the SEEK button on the front panel less than

0.5 seconds, and release the button the display steps up the desired frequency . --Press MEM button more than 1 second then press the number button( from 1~5) on the front panel ,you can save the desired station with your desired number.

25