Troubleshooting
If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult a professional mobile video installer.
There's no sound
1 Check that the player is connected securely and correctly.
2 Make sure you operate the monitor or the amplifier correctly.
There's no picture
1 Check that the player is connected securely.
2 Make sure you operate the monitor correctly, turn on the monitor and select the VIDEO mode.
Do not play
1 There's no disc inside("NO DISC" appears). Insert a disc.
2 Insert a disc with the label side up in the disc slot correctly. Clean the disc.
3 The disc has been shattered, change the disc.
4 Moisture has condensed inside the player.
Remove the disc and leave the player turned on for 2 or 3 hours .
The remote doesn't function
1 Remove the obstacles in the path of the remote and the player. 2 Point the remote at the remote sensor on the player.
3 Replace the battery in the remote with new one if it is weak.
If you forget the password
Press EJECT button. While logo appears on the screen,
press the buttons RPT. , AUDIO on the front panel at the same time, the function settings return to FACTORY SETUP.
29