PYLE Audio PLDVD170 Auto Travel Preset operation, Adjusting the volume, DVD player mode

Radio operation

3 (Auto Travel Preset) operation

When you are driving in an unfamiliar location and want to memorize local stations without changing the standard preset stations(5 FM F2 and 5 LW A2).

A total 10 stations (5 FM F2 and 5 LW A2) can be programmed. To set the stations ....see the [ the RADIO TUNING on page 25]

4 Adjusting the volume

Turn up or down the volume with the button VOL+, VOL-.

1.If no station can be received, " ----- " appears in the display for the empty channel.

2.If fewer than 5 stations can be received, the system will memorize as many stations as possible, then playback starts from the first channel.

3.You can select Auto Travel Preset mode in FM F2(or F3) and LW A2 or [FM F1(or F3) and MW A1] band.

4.Press the number SEL button, you can adjust the sound of the radio.

Remote control operation

The button	Press the button on the remote
on the remote
POWER	Power on/off .
	Power on from the beginning regardless of the mode

(DVD, FM, MW,LW) where you power off.

		DVD/		Switch between the radio mode
				and DVD player mode.
		RADIO
1	2	3	4	In radio mode, select the desired
				channel (ch1~ch5) with the number

5button (1~5)directly

SCAN	Start automatic		tuning and play each receivable stations for several seconds
	store the desired station by press the MEM button and favour number button .
BAND	In radio mode, Press the BAND button you change the current band to others in turn:
	F1	F2	F3	A1	A2

In MW band, press SETUP button,

change to MW-530(10K), MW-531(9K)in turn. If the receiving range of your location is 531~1710K(Hz) tuning step is 9K(Hz). If the range is 530~1710K,the step is 10K. If you are not sure the range of your location, and you can not receive station in current range, try the other range.

1)In radio mode

2)To quickly scan up or down in frequency, press the SEEK button Release the button and the display approaches the desired frequency automatically .

3)store the desired station by press the MEM button and favour number button

1)In radio mode

2)To select frequency finely, press the SKIP button. Each time you press the button the frequency tune up or down in frequency.

3) store the desired station by press the MEM button and favour number button

Store the current station

Select the audio functions: bass, treble, balance, fader, loudness Turn up or down the volume

26