Settings Language, Audio language selection

Settings (Language)

Audio language selection

[LANGUAGE q Audio Language]

Audio Language	English *
Subtitle Language	Japanese
Subtitle Display	Other
OSD Language

Move

Return

Select

Exit

This provides an alternative to the AUDIO button for selecting alternative soundtracks. The default setting is English* but you can also select Japanese, or a number of other different languages as the audio track to be played from a multi-lingual disc.

To select a language other than English or Japanese, move the cursor to “Other” and press ENTER.

Audio Language		English *
Subtitle Language		Japanese
Subtitle Display		Other
OSD Language
List of Language		en : English
Code (0~9)		0 5 1 4
Move	Return	Select	Exit

If you select the List of Language field, you see a list of ten relatively common languages. Select from this list by moving the cursor and pressing ENTER.

If the language you want is not listed here, but is listed on page 35, move the cursor to the Code (0 - 9) field (all numbers are reset as dashes) and use the number buttons to enter the four-digit code for that language. Press ENTER when done.

<If the selected language is not available on the disc, the first language of the disc is played.

Subtitle language selection

[LANGUAGE q Subtitle Language]

Audio Language
Subtitle Language	English *
Subtitle Display	Japanese
OSD Language	Other

Move

Return

Select

Exit

This provides an alternative to the SUBTITLE button for selecting alternative subtitle languages. The default setting is English* but you can also select Japanese, or a number of other different languages for the subtitles to be displayed.

To select a language other than English or Japanese, move the cursor to Other and press ENTER.

If you select the List of Language field, you see a list of ten relatively common languages. Select from this list by moving the cursor and pressing ENTER.

<If the selected language is not available on the disc, the first subtitle language of the disc is used.

Displaying subtitles

[LANGUAGE q Subtitle Display]

Audio Language
Subtitle Language
Subtitle Display	ON *
OSD Language	OFF

Move

Return

Select

Exit

This turns subtitling ON* or OFF.

Note that the captions on some disks cannot be turned off.

On-screen display language

[LANGUAGE q OSD Language]

Audio Language
Subtitle Language
Subtitle Display
OSD Language		English *
		Japanese
Move	Return	Select	Exit

There are two choices here: English* and Japanese.

NOTE: If the unit is set to Japanese and you find it impossible to read the menu settings, etc., you can restore all the factory default settings, and the menus will appear in English again (all other settings will be wiped out. Alternatively, press

SETUP, navigate to the third tab ( ), move down to “OSD

” and select the first option “ (English)”.