Initial Installation, Setting Auto clock

Initial Installation

■Switch the TV on.

■You can also start "AUTO SET" in the SETUP "PR PRESET" "AUTO SET".

■To tune in new stations (manual tuning) and to enter station names see page 23-24.

Setting time and date / Auto clock

Setting time and date

Setting up the player

■Press [VCR] button on the remote control to change into VCR Mode and follow the procedure

1	You should see this picture the first time you switch on the TV
	and player.

Choose your language.

LANGUAGE SET

ENGLISH

DEUTSCH

ITALIANO

ESPAÑOL

FRANÇAIS

NEDERLANDS

PR+/-:SELECT

OK:CONFIRM SETUP:END

below.

1	Call the player’s "MAIN SETUP",
	choose "VCR SETUP", then "CLOCK SET".

CLOCK SET

TIME - - : - -

DATE - - / - - /- - - -

0-9:SETUP (HOUR)

</>:CORRECT SETUP:END

2	Then choose your country.
2	For selecting the country, refer to the followings.
	B: Belgium	I: Italy	SF: Finland
	D: Germany	LUX: Luxembourg	CH: Switzerland
	DK: Denmark	N: Norway	TR: Turkey
	E: Spain	NL: Netherlands
	GR: Greece	S: Sweden

3	OK for "AUTO SET!".
	"AUTO SET" tunes in all the stations you can receive in your
	country and sorts them in an order common for your country.

COUNTRY SET
B	N
D	NL
DK	S
E	SF
GR	CH
I	TR
LUX	OTHERS
PR+/-:SELECT
OK:CONFIRM	SETUP:END

CH 25

2	Move to the position you want to change and type in the
	new values.
	Wait a few seconds after typing a one-digit number.

Store with [OK] button and exit with [SETUP] button.

CLOCK SET

TIME 06:05

DATE 10/03/2002(SUN)

0-9:SETUP (HOUR) </>:CORRECT

OK:CONFIRM SETUP:END

Basic Operation

	Clock is automatically set.

4	If other stations are positioned on near the current RF OUTPUT
4	CH, the guide message appears automatically.
	The player recommends the optimal RF OUTPUT CH number
	automatically.

5	Press the [OK] button to confirm the recommended PR.
5	Should you wish the stations to have the same numbers as those

used on the TV, follow the instructions in "Sorting programme locations" on page 24.

Else ...

exit the basic installation function and enjoy your player.

•If you don´t see this picture, because you don´t use a SCART cable, search this picture now (CH 52) with the station tuning functions of your TV set (see its user manual).

•		In case of interference problems on CH 52, type in an
		other transmission channel between 21 and 69 using
		other transmission channel between 21 and 69 using
		the number buttons.

PLEASE WAIT...

	SETUP:END

RF OUTPUT SET
CURRENT	CH 52
RECOMMENDED CH 54
0-9:SELECT(21-69)
OK:CONFIRM	SETUP:END

IMPORTANT!

PLEASE CHANGE THE TV

CH TO 54.

MANUAL SET

PR01 ARD	PR08 P-08
PR02 ZDF	PR09 P-09
PR03 P-03	PR10 P-10
PR04 P-04	PR11 P-11
PR05 MTV	PR12 ----
PR06 P-06	PR13 ----
PR07 P-07	PR14 ----

PR+/-:SELECT

OK:CONFIRM SETUP:END

Setting Auto clock

■Auto Clock is only available for models with the VPS/PDC function (see page 25).

Some broadcasting stations may send the time and date along with the VPS/PDC data. The video will automatically use this time and date during the initial setting up procedure during normal use, and every time you switch the video off at the mains. If you find that this time and date is incorrect you can remove this feature by following the steps below changing it to OFF mode, you will then have to manually set the time and date, see above.

VCR SETUP		AUTO CLOCK
CLOCK SET
LANGUAGE SET		ON
RF OUTPUT SET		ON
RF OUTPUT SET		OFF
16:9 SET		OFF
16:9 SET
OSD ON/OFF
AUTO CLOCK		PR+/-:SELECT
PR+/-:SELECT		PR+/-:SELECT
OK:CONFIRM	SETUP:END	OK:CONFIRM	SETUP:END