Daewoo SD-9500, SD-3500 owner manual Normal timer recording, Timer Review changing and erasing

Timer Recording

■For timer recordings, clock, date, and stations must be set correctly.

■Load a cassette with its safety tab in place and with sufficient free space for the recording.

Normal timer recording

Timer Recording

Timer Review – changing and erasing

Call the player’s "MAIN SETUP", choose "TIMER PROGRAM".	HOW OFTEN DO YOU WANT
Decide if you want to record "ONCE", "WEEKLY" or	TO RECORD THIS PROGRAM?
	ONCE
"DAILY"...	WEEKLY(ONCE A WEEK)
	DAILY(MON-FRI)
1 ... and confirm.	DAILY(MON-SAT)
	DAILY(MON-SUN)
	PR+/-:SELECT
	OK:CONFIRM	SETUP:END
Type in one after the other:
• The programme location number;	TIMER PROGRAM (ONCE)
	PR	--

1

Call the player’s "MAIN SETUP", choose "TIMER PROGRAM".

Select the programming to change or erase. If you want to erase this programming press

TIMER PROGRAM

PR	START	END	DATE
03	21:20	22:20	14/10
01	18:10	20:30	20/10
--	-- : --	-- : --	-- / --
--	-- : --	-- : --	-- / --
--	-- : --	-- : --	-- / --
--	-- : --	-- : --	-- / --
--	-- : --	-- : --	-- / --
--	-- : --	-- : --	-- / --

PR+/-:SELECT

OK:CONFIRM SETUP:END

TIMER PROGRAM (ONCE)

PR	03
START TIME	21:20

2	• the time the broadcast starts,	START TIME	--:--
	• the time the broadcast ends,	END TIME	--:--
		START DATE	--/--
		TAPE SPEED	SP
	• the day of the broadcast, if it is not today.	VPS/PDC	ON
	• Select LP if you wish to make a very long recording .	PR+/-:SELECT(AV1/AV2)
		0-9 :SETUP(PR)
	• Switch off VPS/PDC here if you need to .	</>:CORRECT	SETUP:END
	If you wish to make changes:
		TIMER PROGRAM (ONCE)
3	Move to the position you want to change using the [< / >]	PR	01
		START TIME	18:10
	buttons. Change the setting using the [PR+/- ] or [number]	END TIME	20:30
		START DATE	20/10(FRI)
	buttons.	TAPE SPEED	LP
		VPS/PDC	ON
	If all setting are ok, press [< or >], till you see “OK :	PR+/-:SELECT(AV1/AV2)
		0-9 : SETUP (PR)
	CONFIRM” in the bottom line.	</>:CORRECT	SETUP:END
	Confirm.	OK:CONFIRM
	Switch your player off.

•Wait a few seconds after typing a one-digit-number.

•If you have made a mistake, move to the position you want to change using the [< / >] buttons and change the setting.

•If programme timings overlap, the machine will give a warning message. If you don’t adjust the times, the machine will record the first programme completely then continue with the second one.

•If there is no sufficient free space for the recording on the cassette the video switches automatically to “LP” for double recording capacity.

•The recorder will eject cassettes which have the safety tab removed.

2 button [0], confirm with OK. If you wish to make changes:

Move to the position you want to change using the [< , >] buttons.

Change the settings using the [PR +/–] or [number] buttons.

If all settings are ok, press [< or >], until you see "OK: CONFIRM" in the bottom line.

Confirm changes with [OK]. Exit the menus.

END TIME	22:20
START DATE	14/10(SAT)
TAPE SPEED	SP
VPS/PDC	ON
0 :ERASE	SETUP:END
</>:CORRECT

VCR Operation

26 27