Daewoo SD-9500, SD-3500 owner manual Before doubting about troubles VCR

Before doubting about troubles (VCR)

Symptom	Checks
• “Power On” does not work.	➤ Please check whether a power plug is inserted in an electric outlet.
• It does not work even in “Power On”.	➤ Please check whether a videotape is inserted in.
	➤ Try to insert a plug again.
• A videotape is not inputted in.	➤ Please check whether a power plug is inserted in an electric outlet.
	➤ Please check whether a videotape is in.
	➤ Please check whether a videotape is inserted in a right direction (a
	side of transparent window should be on the upside)
	➤ Have you inputted a videotape again just after the tape was ejected?
	Please try it again after fully ejecting it.
	➤ When a videotape forces to be ejected, the tape may not be inputted. In
	the case, please pull out an outlet, and then push the tape smoothly.
• On inputting a videotape, the tape is	➤ That’s why a safe mode to protect a videotape is operated
re-ejected.	automatically. Please pull out the tape and input it again.
• A videotape is not ejected.	➤ In case the product is used for a long time, a videotape may not be
	ejected for a film inside may be stretched. In the case, please pull out
	a power plug for about 10mins and then press “EJECT” button.
• A channel on video and a play screen	➤ Please check your antenna’s connection.
does not appear.	➤ TV channel should be fixed on video channel.
	➤ Please check your antenna’s signal whether it may be weak. In case of its
	weakness, please use a frequency amplifier connected with the device.
	➤ Press “TV/VCR” and then let “VCR” is displayed on the display panel.
• Noise (screen noise) appears on	➤ While in no use of VCR, was it turned on?
screen.	➤ While in recording a program, do you watch another channel?
	➤ Select TV by pressing [TV/VCR] button on remote control.
• Noise appears on screen after	➤ While in playing a videotape, there may happen some noise or blot
recording.	in the part of the beginning of a videotape or resuming “PAUSE”,
	which are not breakdown.
• While in playing, noise appears.	➤ Please press “TRACKING” for better screen. Videotape may be
	poor. Try to change it to another one.
• Sound and screen are irregular.	➤ Please use a head-cleaner to clean VCR heads. VCR heads may be
• Sound comes out but screen does not	contaminated.
appear.
• Screenisirregularandstripesappears.
• "Screen Error" message is displayed
in a screen.
• While recording and playing, the top	➤ Since VCR Play signals are not stable like a TV signals, screen may
of screen extremely waves.	be unstable or curved while in playing. To fix the problem, please
	horizontal adjustment.
• A screen is not clear.	➤ In case videotape is the one recorded by other products or old one,
	stripe may appear on the screen.
	➤ Try to adjust the screen by [TRACKING+/-] button
	➤ Try to use a head-cleaner.
• A screen at pause is trembling or	➤ Try to use a head-cleaner.
slow screen is not clear.	➤ Try to adjust the screen by [TRACKING+/-] button.

		Before doubting about troubles (VCR)
Symptom		Checks
• Recording a TV program is	➤	For recording, you should use videotape with a tab.
impossible.	➤	Please check whether a channel is fixed on video. If not, you have to
		turn it into “TV” by pressing “INPUT” button.
	➤ Please check whether the timer recording info is right.
	➤ Are RF cables inputted antenna connection terminal correctly?
	➤ Does a CH number selected in display section appear?
	➤ Please check a tab on a tape whether it is broken or not. (If it was
		broken, please scotch-tape it)
	➤ Check whether a tape attached with a recording tap is inserted.
	➤	Check whether the screen is displayed in VCR Only Channel. Press
		[INPUT] button in this remote controller to adjust in "General
		Broadcast" condition.
	➤ Is the rounded line (RF cable) connected in "ANT.IN" terminal?
	➤ Is the selected channel number shown in Display?
	➤	Is a tab of cassette tape broken? (Please cover a tab hole with
		cellophane adhesive tape (Scotch tape).)
• Once pressing “REC”, a videotape is	➤ Please check whether the clock is right.
	➤	Does the display on your video show “	” (Ready to timer
ejected automatically.		recording)? Please make it out.
	➤ Please check whether the timer recording info is right.
	➤ Please check a tab on a tape whether it is broke or not. (If it was
		broken, please scotch-tape it)
• Timer recording of Cable TV does	➤ Was a cable data output code connected correctly?
	➤ Were a converter manufacturer setup and output channel right?
not work.
	➤ Did you enter a password? (Please cancel it.)
	➤ Did you turn off your player? (Please turn it on.)
• In spite of pressing “CHANNEL”, a	➤	You may not memorize channels.
channel can not be set.	➤	Please check your channel setting or press a number button.
• While duplicating, screen is not	➤	Some tapes or discs distributed in the market for lending is set to
clean and distorted.		prevent copy in manufacturing. These tapes cannot be duplicated in
		a good condition.
• remote control does not work.	➤	Battery may be weak or exhausted.
	➤ A receiver of remote control may be different with a sender.
• Buttons on remote control do not	➤	In case a videotape is positioned in the beginning, “VISS REW” and
work.		“REW” do not work.
	➤ In case a videotape is positioned in the end, “FF”, “VISS FF”, “PLAY”
		and “REC” do not work.
	➤ Please check whether another button is pressed.
• VISS index search does not work.	➤	Are you playing a tape that is not recorded in this recorder? (Try to
		record it with the recorder.)
	➤ You may start recording it in “REC-PAUSE”. Please start recording it
		from stop condition.
• Cable broadcasting can not be	➤	Please select “CABLE” not “NETWORK” from the “CHANNEL
selected.		SETTING”.		The others

50 51