Connecting your player to the Hi-Fi system
■Before you start, unplug all the equipment from the mains supply.
How to connect your player to another player
■Before you start, unplug all the equipment from the mains supply.
How to connect
Option 1
Television |
230V~, |
50/60 Hz |
Hi-Fi
Aerial
Plug a phono cable into the “Audio L/R” sockets on the back panel and into the audio sockets on any audio amplifier, if needed. If your
230V~, 50/60 Hz
First player
Second player
Installation
Player |
player does not have this connection, see page 14.
1)Insert the tape you wish to record on into the first player and press [OUTPUT] until “AV1” appears on the front display.
2)Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.
3)Press the [RECORD] button on the first player.
The player will start recording.
If your player has two scart sockets, you can use the other socket “AV2” to connect other equipment. To use this function, see page 15.
How to connect your player to a camcorder
You can also use a scart lead to improve picture and sound quality from your player.
■Before you start, unplug all the equipment from the mains supply.
Option 2
How to connect
Television
230V~, 50/60 Hz
Hi-Fi
Aerial
Plug a scart to phono cable into the “AV1” socket on the back panel and into the audio socket on any audio amplifier, if
Television
230V~, 50/60 Hz
Aerial
Camcorder
to camcorder
Player
needed.
| Scart Plug |
Player | to TV |
|
If you have connected your camcorder in this way, you can also connect a scart lead from “AV2” on the back panel of the player to the television. To use this function, see page 15.
You can also connect the camcorder by using a phono cable if your player has front input sockets. Check the front of your player for this connection, see page 15.
12 | 13 |