TIPS ON REAR PANEL CONNECTIONS
S-Video connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the television.
Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.
A single VCR can be used for VCR#1 and VCR#2, but note that a VCR cannot record its own video or line output. (INPUT:1 in example on page 11.) Refer to your VCR operating guide for more information on line input-output connection.
You may use VIDEO, S-VIDEO, or COMPONENT: Y-CBCRinputs to connect to Input 2, but note that only one of these may be used at a time.
Connect only 1 component to each input jack.
COMPONENT: Y-CBCRconnections are provided for high performance components, such as DVD players. Use these connections in place of the standard video connection if your device has this feature.
When using the Y-CBCRinput jacks, connect your components audio output to the TV s Input 2 Left and Right Audio input jacks.
Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV s CB input and the components R-Y output to the TV s CR input.
It may be necessary to adjust TINT or turn AUTO COLOR-ON to obtain optimum picture quality when using the Y-CBCRinputs. (See pages 53 and 54.)
To ensure no copyright infringement, the MONITOR OUT output will be abnormal, when using the Y-CBCRjacks.
When using the Y-CBCRjacks, Input 2 will be viewed as a blank PIP sub-picture. (See page 27.)
15
