Picture-In-Picture Pip, PIP button, Split Mode PIP

PICTURE-IN-PICTURE (PIP)

Your HITACHI Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This Dual Tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each. The Dual Tuner can operate with only one input (ANT A only) or two inputs (ANT A and ANT B).

ANT A input can be viewed as both the main picture and the sub-picture simultaneously. ANT B and COMPONENT: Y-CBCR input 2 sources can only be viewed as a main picture. To select between main picture and PIP sub-picture tuning, press the PIP CH button on the remote. The highlighted channel display will move with every press of the PIP CH button. When the top channel display is highlighted, channel tuning is for the main picture. When the lower channel display is highlighted, channel tuning is for the PIP sub- picture. This method of picture tuning is the same for one antenna input (ANT A only) and two antenna inputs (ANT A and ANT B).

The Picture-in-Picture feature is convenient when you want to watch more than one program at the same time. You can watch a TV program while viewing other programs from the ANT A source or any of the video inputs.

POWER
TV	CABLE	SAT
PIP	SWAP	MOVE
PIP CH	HELP	FRZ
		TV/CABLE/SAT
		VCR
	LST-CH	AUDIO
	LST-CH
VOL	MUTE	CH
INFO		EXIT
	GUIDE
		L
		I
		G
		H
RECALL	MENU	C.S. T
FAV	MENU	FAV
CH		CH

	SVCS	SCHED
	REC	SELECT

PIP button

Press the PIP button and a sub-picture will appear in one of the three different modes (SINGLE, SPLIT or SURF), depending on the last selection of the PIP mode. To change the PIP mode use the CURSOR or buttons and the new selection will appear the next time the PIP function is used.

SINGLE MODE PIP

Press the PIP button and a sub-picture appears in one corner of the screen. Press the button again to reduce the size of the sub- picture. Press the PIP button a third time to remove the sub-picture from the screen. Use the PIP CH button to select between main and sub-picture tuning control (indicated by highlighted channel display.) Press the INPUT button when sub-picture channel tuning is being controlled, to change between VIDEO: 1, VIDEO: 2, VIDEO: 3, and ANT A antenna source. (ANT B source cannot be viewed as a sub-picture and COMPONENT: Y-CBCRInput 2 source will be displayed as a blank sub-picture).

PIP

ANT A 10 PIP VIDEO: 1

SINGLE

SPLIT SURF

Main Picture

PIP

Sub Picture

ANT A 10

PIP VIDEO: 1

SINGLE

SPLIT

SURF

PIP

ANT A 10

SPLIT MODE PIP

When you press the PIP button, the main channel and the PIP sub-picture will appear at the center of the screen (main channel on right side and sub-picture on left side). Press the PIP button a second time to return to normal viewing. Use the PIP CH button to select between main and sub-picture tuning control (indicated by highlighted channel display). Press the INPUT button when sub-picture channel tuning is being controlled, to change between VIDEO:1, VIDEO:2, VIDEO:3, and ANT A antenna source. (ANT B source cannot be viewed as a sub-picture and CONPONENT: Y-CBCR/Y-PBPRINPUT 2 source will be displayed as a blank sub-picture).

PIP

SINGLE

SPLIT SURF

PIP

NOTES: 1) Since ANT B source cannot be viewed as a sub-picture, only SPLIT mode PIP is possible when ANT B is selected as the main channel.

2)When ANT B is selected as the main channel, the SWAP feature is disabled.

3)When the COMPONENT: Y-CBCR/Y-PBPRInput 2 is selected as PIP, it will appear as a blank sub-picture.

4)When tuned to Video:2 with component input (Y-CBCR/Y-PBPR) you will not be able to access the PIP functions.

5)Only sound from main picture can be heard, unless you choose sub-picture audio from the THEATER wireless sound mode and use the wireless out outputs on the rear panel.