Runco 61SBX59B, 53SBX59B manual Connecting a Stereo Laserdisc Player or DVD Player to Input

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING A STEREO LASERDISC PLAYER OR DVD PLAYER TO INPUT 2.

1.Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 2 (Y) jack as shown on the TV set below.

2.Connect the cable from the CB OUT or B-Y OUT of the Laserdisc or the DVD player to the INPUT 2 (CB) jack, as shown on the TV set below.

3.Connect the cable from the CR OUT or R-Y OUT of the Laserdisc or the DVD player to the INPUT 2 (CR) jack, as shown on the TV set below.

4.Connect the cable from the AUDIO OUT R of the Laserdisc or DVD player to the INPUT 2 (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc or DVD player to the INPUT 2 (AUDIO/L) jack.

6.Press the INPUT button until VIDEO:2 appears, to view the program from the Laserdisc or DVD player. The mode VIDEO:2 disappears automatically after approximately eight seconds.

7.Press the INPUT button to return to the previous channel.

S-VIDEO	COMPONENT
Y	CB	CR
VIDEO

(MONO)

L

R

AUDIO

INPUT 2

TV INPUT 2

TERMINAL

R L Y CB CR

AUDIO VIDEO

OUTPUT

BACK OF DVD PLAYER

HITACHI MODEL or similar model

NOTES: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be abnormal if the connection is loose.

See page 15 for tips on REAR PANEL CONNECTIONS.

19