Runco CX-47HD Connecting the Crystal, Series LCD to Source Sections that follow Components

Installation

Connecting the Crystal ➤	Connect your video sources to the Crystal Series LCD as shown and described in the
Series LCD to Source	sections that follow.
Components

HDMI Connections: The Crystal Series LCD has four HDMI inputs for connecting a

BD/HD-DVD/DVD player, DTV decoder, personal computer or any other device with an

HDMI or DVI output. Connect such devices as shown in Figure 3-1.

Tip

Note

Use the HDMI inputs whenever possible. This ensures the highest video quality because the signal is carried in the digital domain throughout the entire signal path, from source component output into the display.

This Crystal Series LCD supports the VESA Display Data Channel (DDC) standard. This standard provides “Plug and Play” capability; the display and a VESA DDC-compatible computer communicate their setting requirements, allowing for quick and easy setup.

In order for Plug and Play to work correctly, you must turn on the display before you turn on the connected computer.

Audio	PC
In
+	–
	Speaker L
	Out R

IR

In SPDIF Out HDMI 1HDMI 2HDMI 3HDMI 4

Rear of the PC

Audio Cable

(Sold Separately)

DVI-to-HDMI Cable

(sold separately)

HDMI or
DVI-to-HDMI Cable	BD/HD-DVD/
(sold separately)
	DVD/DTV STB

RGB

Figure 3-1. HDMI Connections

20 Crystal Series LCD Installation/Operation Manual