Operation
Table
Table 4-2. Effects of Primary Color Hue Adjustments
Primary Color | Press to move the color... | Press to move the color... |
|
|
|
Red | Closer to magenta | Closer to yellow |
|
|
|
Yellow | Closer to red | Closer to green |
|
|
|
Green | Closer to yellow | Closer to cyan |
|
|
|
Cyan | Closer to green | Closer to blue |
|
|
|
Blue | Closer to cyan | Closer to magenta |
|
|
|
Magenta | Closer to blue | Closer to red |
|
|
|
•CMS Saturation: This control adjusts the color saturation level – the amount of that color in a video image. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.
•CMS Luminance: This control adjusts the intensity or luminance of a given color.
The default setting for all CMS controls is 50.
Blue Enable: Blue Enable removes all red and green color information from the image, simulating a blue filter. You can use it instead of a blue filter when performing color and tint adjustments.
Factory Reset: To reset all Crystal Series LCD settings to their factory defaults, select Factory Reset from the ISF Calibration menu and press ENTER. To confirm the reset, press 
or 
to highlight Yes and press ENTER again. This command is not undoable. Use it with caution!
44 | Crystal Series LCD Installation/Operation Manual |