Runco CX-47HD, CX-OPAL47, CX-OPAL42 0090, Personalizing the Splash Screen Using Serial Commands

Serial Communications

Table 6-1. Serial Commands (continued)

Command Description

0088	BRIGHT -
0089	CONTR +
0090	CONTR -

To personalize the start-up splash screen with the customer name, Runco dealer name or any other string (up to 28 characters long), send the following commands:

•[c############################] to program the customer name or other string (represented by ############################)

•[d############################] to program the dealer name or other string (represented by ############################)

To send a command from a PC running terminal emulation software, create a text file containing that command. Then, use the file transfer function in your terminal emulation program to send the command. (If you are using HyperTerminal, choose “Send Text File...” from the Transfer menu.)

When you do, the Crystal Series LCD echoes the string back to the control system or PC, enclosed in quotes (for example, "Runco Customer"). If it doesn’t, verify that you sent the command correctly.

To see the changes take effect, cycle power to the Crystal Series LCD.

For example, sending the commands [cRunco Customer] and [dBy: Runco Dealer] causes the splash screen to look like this:

Personalizing the Splash

Screen Using Serial

Commands

CALIBRATED FOR:

Runco Customer By: Runco Dealer

CUSTOM BUILT BY:

Crystal Series LCD Installation/Operation Manual 55