Sanyo STK-RCS-7TWSUA service manual Specifications

1. SPECIFICATIONS

	Item		Description
Signal Transmission Method			Dedicated Remote Controller Cable
Power Source			DC5V supplied from Indoor Unit
Display Panel Type			Liquid Crystal
		Temperature	Set Temperature Indication (68 ºF to 86 ºF)
Display Items		Airflow Direction	Six Directions Indication
		Time	AM and PM 12-Hour Indication (Minute Indication Unit: 1 minute)
		Temperature Sensor	Displayed when indoor unit sensor is in use
Functions			AUTO, HEAT, DRY and FAN Operation	NOTE	2
Operation Section			Push Switch	NOTE	2
Room Temperature Detection			Detection using the Sensor in the Remote Controller or
			Indoor Unit Temperature Sensor
			(The detection result is transmitted to the indoor unit every 5 minutes)

NOTE 1. When the indoor unit is modified from one for wireless remote controller to that for

wired remote controller, some of the functions becomes unavailable.

Therefore, before such modification, make sure to receive an approval of the client. Also, the self-diagnostics procedure is changed.

•Unavailable Functions : Refer to "3. FUNCTIONS".

•Self-Diagnostics Procedure : Refer to "4. SELF-DIAGNOSTICS".

2.The mode change or SINGLE/MULTI change-over operation is performed using the slide switch located inside the rear of the remote controller.

Refer to "APPENDIX B : INSTALLATION INSTRUCTIONS" for details.

70.0

16.5

120.0

4