SETTING THE TIMER 
1. How to set the present time
(Example) To set to 9:10 pm.
| Operation | Indication |
|
|
|
1. | Press the SET button three | The time indication alone |
| times. | flashes. |
2. | • Press the HH button until | The display will flash for 10 sec. |
| PM 9 is displayed. | and automatically stop flashing |
| • Press the MM button until | except for the “ : ” symbol. |
| 10 is displayed. |
|
|
|
|
2. How to set the OFF time
(Example) To stop the air conditioner at 11:30 pm.
OFF TIME | Present time |
|
|
Operation | Indication |
1.Press the SET button twice. The timer 
indication alone flashes and the previous set- time is only displayed.
2. | • Press the HH button until | The display will change |
|
| PM 11 is displayed. | automatically back to show the | |
| • Press the MM button until | present time after about 10 sec. | |
| 30 is displayed. |
|
|
3. | Press the TIMER SELECT | The present time and | are |
| button twice to set OFF time. | displayed. |
|
To cancel the setting, press the TIMER SELECT button twice.
3. How to set the ON time
(Example) To start operation at 7:10 am.
| ON TIME |
|
| Present time | ||
|
|
|
|
|
|
|
| Operation |
| Indication |
|
| |
|
|
|
|
|
| |
1. | Press the SET button once. | The timer |
| indication alone | ||
| ||||||
|
| flashes and the previous set- | ||||
|
| time is only displayed. |
|
| ||
2. | • Press the HH button until | The display will change |
|
| ||
| AM 7 is displayed. | automatically back to show the | ||||
| • Press the MM button until | present time after about 10 sec. | ||||
| 10 is displayed. |
|
|
|
|
|
3. | Press the TIMER SELECT | The present time and |
| are | ||
| ||||||
| button once to set ON time. | displayed. |
|
|
|
|
|
|
|
|
|
|
|
To cancel the setting, press the TIMER SELECT button three times.
4. How to set daily ON/OFF repeat timer
(Example) To start operation at 7:10 am. and stop the air conditioner at 11:30 pm.
Present time | OFF TIME |
ON TIME |
|
| Programmed | ||
|
|
| daily ON / OFF | ||
9:10 pm. | 7:10 am. | 11:30 pm. | |||
Present time | ON | OFF | |||
|
|
|
|
|
|
|
|
|
|
|
|
Operation |
| Indication |
|
|
|
Set the timer ON/OFF times as | The present time PM 9:10 and | |
shown in 2 and 3. |
| are displayed. |
| ||
|
| |
|
|
|
To cancel the setting, press the TIMER SELECT button once.
NOTE
You can check the timer ON/OFF times after you have set them by pressing the SET button.
5. Backup function
Even if the main power supply to the unit is turned off, the remote controller will store the previous settings in its internal memory for up to 8 hours. If the power is not turned back on within 8 hours, the previous settings will be lost. In this case, the mode settings must be reset by the user.
8 | |
|