Sanyo VHR-H690 Locations of Controls and Indicators, Front Panel, Auto A/V Selection

SC4H/CA3 (VHR-H690 GB) Tue. Mar. 14/2000

LOCATIONS OF CONTROLS AND INDICATORS

Front Panel
1	2	3 4 5
			hPAUSE/STILL
POWER			c
		f		e
		REW		FF
			PLAY
AV INPUT		aREC	bSTOP/iEJECT

VIDEO L-AUDIO-R

CHANNEL

REC. LIST

I H G F 9 8 7 6

Reference pages are shown in square brackets.

1POWER button

2Cassette loading slot

3 REW (rewind) button [31]

This button is used both for rewind and reverse picture search.

4 PAUSE/STILL button [25, 31]

œPress this button in the record mode to temporarily stop a recording (PAUSE).

œPress this button in the playback mode to view a still frame (STILL).

œPress this button repeatedly in the still mode to advance the picture one frame at a time.

5 FF (fast forward) button [31]

This button is used both for fast forward and forward picture search.

6 REC. LIST button [27]

œPress this button when a cassette tape is loaded, the Rec. List Super menu appears.

7 STOP/EJECT button [3, 23]

8 PLAY button [23]

9 REC (record) button [25, 38]
F Indicator panel [5]
G Remote control sensor
H CHANNEL selection buttons (l and j)	[15, 24, 38]
I Front-panel AUDIO/VIDEO input jacks	[25, 40]

Connect the audio and video outputs from an external unit (i.e. a video camera, second VCR) to these jacks. To record the signals coming from the external unit, press the INPUT button on the remote control to display “L2” instead of a channel number (see page 25). If only one audio jack is to be used, connect it to the L (left) jack.

Auto A/V Selection [18]

There is no need to unplug the VCR from the TV to view another video source on-screen. When the VCR power is off and the output cable from an external unit is connected to these front A/V input jacks, the signal from the external unit is automatically sent to the connected TV screen.

NOTE: The POWER, STOP/EJECT, REC, PAUSE/STILL, FF, PLAY and REW buttons illuminate according to each VCR mode.

4