Sanyo DP19640 manual Antenna connections

Page 13

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Antenna		Connect the 75 ohm cable from the combination
Antenna	Antenna	VHF/UHF antenna to the antenna jack.
Jack	Antenna	If your combination VHF/UHF antenna has a 300
	Jack	If your combination VHF/UHF antenna has a 300
		ohm twin-lead wire, the use of the 300-75 ohm
		matching transformer may be necessary.

ENGLISH

75ohm Coaxial Cable

300-75 ohm Matching Transformer

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna

Jack

Combiner

UHF 300 ohm	VHF 300 ohm

Connect the UHF 300 ohm twin-lead wire to the Combiner (not supplied). Connect the VHF 300 ohm twin-lead wire to the 300-75 ohm Matching Transformer. Attach the Transformer to the Combiner, then attach the Combiner to the Antenna Jack.

300-75 ohm Matching Transformer

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

Antenna

Jack

Combiner

UHF 300 ohm

Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wire to the Combiner (not supplied).Attach the Combiner to the Antenna Jack.

VHF 75 ohm

13

Image 13

Contents Español Français English HOW to Make a Claim Under this Warranty Warranty ApplicationObligations Model NoTrademarks Page To provide some protection against Wire to an antenna discharge unit, sizeVoltage surges and built-up static Charges, of the NationalIssue Child SafetyTune Into Safety This Manufacturer CaresCondensation HOW to Handle the LCD PanelHow to remove the stand How to attach the standPower source FeaturesTo USE AC Power Contents Front Parts and functionsRight side Rear CH Channel + / / Cursor Battery PrecautionsAntenna connections Cable TV connections Cable TV Jack Splitter Switch Ohm Cable to TVCable TV Jack Ohm Cable to TVTo connect the LCD TV to a VCR Connections to other equipmentTo connect the LCD TV to a VCR with an S-Video cord To connect the TV to a camcorder, or a TV GameTo connect a Hdmi or a DVI device to the unit Using an AV Amplifier with built-in digital surroundTo Hdmi out Hdmi device To PC/HDMI RGB To connect the TV to a PC Personal ComputerAspect Ratio VerticalTo select the video input source TV operationQuick guide for menu operation Convenience functions You can change the default settings to convenience useMemorizing channels Cable ChartAir/Cable selection Automatic searchClear All Labeling video inputsTo clear a Ch Label Or EnterTo register a password Setting the V-ChipTo change the password To set the V-ChipClosed Caption To clear the all V-Chip settingsCC advanced Setting the picture size Ignition Reception disturbancesSymptoms Possible Solutions TroubleshootingAccessories SpecificationsGeneral Memo J3AI0331A SH 10/02 K