Sanyo DP19640 manual Connections to other equipment, To connect the LCD TV to a VCR, Dvd

Page 15
To connect to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVD player with the COMPONENT video cables (not supplied).
Component video cord (not supplied)To Component OUT
Y Pb
Pr
To Audio OUT

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.

To connect the LCD TV to a VCR

 

 

Rear of the unit

 

VCR

To VIDEO/AUDIO IN

To Video/Audio OUT

 

Video/Audio cord (not supplied)

To connect the LCD TV to a VCR with an S-Video cord

If you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also connect the audio cables to the AUDIO IN jacks on the rear of the unit.

The S-Video cable only carries the video signal. The audio signal is separate.

NOTE:

• When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable takes precedence.

Rear of the unit

 

To S-Video OUT

VCR

To S-VIDEO IN

S-Video cord (not supplied)

 

To AUDIO IN

Audio cord (not supplied) To Audio OUT

 

ENGLISH

Rear of the unit

DVD

To component AUDIO IN

Audio cord

(not supplied)

To COMPONENT IN

NOTE:

• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and 480p/720p progressive signals.

To connect the TV to a camcorder, or a TV Game

To playback from a camcorder, connect the camcorder to the unit as shown.

This unit can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams.You’ll need to consult each component’s Owner’s Manual for additional information.

Rear of the unit

To VIDEO/AUDIO INTo Video/Audio OUT

Video/Audio cord (not supplied)

or

 

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Español Français English Model No Warranty ApplicationHOW to Make a Claim Under this Warranty ObligationsTrademarks Page Charges, of the National Wire to an antenna discharge unit, sizeTo provide some protection against Voltage surges and built-up staticThis Manufacturer Cares Child SafetyIssue Tune Into SafetyCondensation HOW to Handle the LCD PanelHow to remove the stand How to attach the standFeatures Power sourceTo USE AC Power Contents Parts and functions FrontRight side Rear CH Channel + / / Cursor Battery PrecautionsAntenna connections Ohm Cable to TV Cable TV Jack Splitter Switch Ohm Cable to TVCable TV connections Cable TV JackTo connect the TV to a camcorder, or a TV Game Connections to other equipmentTo connect the LCD TV to a VCR To connect the LCD TV to a VCR with an S-Video cordUsing an AV Amplifier with built-in digital surround To connect a Hdmi or a DVI device to the unitTo Hdmi out Hdmi device To PC/HDMI Vertical To connect the TV to a PC Personal ComputerRGB Aspect RatioTo select the video input source TV operationQuick guide for menu operation Convenience functions You can change the default settings to convenience useAutomatic search Cable ChartMemorizing channels Air/Cable selectionOr Enter Labeling video inputsClear All To clear a Ch LabelTo set the V-Chip Setting the V-ChipTo register a password To change the passwordTo clear the all V-Chip settings Closed CaptionCC advanced Setting the picture size Ignition Reception disturbancesSymptoms Possible Solutions TroubleshootingSpecifications AccessoriesGeneral Memo J3AI0331A SH 10/02 K
Top Page Image Contents