Connections to other equipment
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with
Connect an AV amplifier with
Rear of the unit
To DIGITAL AUDIO 
COAXIAL OUT
Coaxial digital cable (not supplied)
Front
Speaker
(Left)
Front
Subwoofer Speaker
(Right)
TV
To Coaxial
Digital Audio IN
AV Amplifier with
| Center Speaker |
Surround | Surround |
Speaker (Left) | Speaker |
| (Right) |
NOTE:
• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio. There will be no sound output if connected to an AV amplifier with a
To connect a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.
When you connect to a DVI device with a
Rear of the unit
To HDMI out 
HDMI device
or
To PC/HDMI 
AUDIO IN
To HDMI
IN HDMI cable (type A connector) (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
Audio cord (not supplied)
DVI device
To DVI output
NOTE:
• When using HDMI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 20). Otherwise you will only see the image with no sound.
• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.
Should you require further instruction, please contact the manufacturer of the external component.
16