TV SPECIFICATIONS
TV specifications
Common specification
Power source | AC 220~240V 50Hz |
Television system | System I |
Colour system | PAL/NTSC4.43 |
| (PAL/NTSC4.43/NTSC3.58 in AV mode) |
Channel coverage | UHF: |
Aerial input impedance | 75 ohm |
AV terminal |
|
|
|
| AV1: | CENELEC Standard | |
| Input: | Composite video, RGB and | |
| Output: | ||
|
|
| |
| AV2: | CENELEC Standard | |
| Input: Composite video, RGB, | ||
|
|
| |
| Output: | ||
|
|
| |
Front AV terminal |
|
|
|
| AV3: | RCA jacks | |
| Input: | Composite video and | |
Heaphone socket | Mini Jack |
| |
Sound output |
|
| |
|
|
| |
(Continuous) | 2 x 10W |
| 2 x 10W |
Picture tubes |
|
|
|
(inches) | 28 |
| 32 |
Dimensions |
|
|
|
(WxHxD mm) | 786 x 519 x 504 | 880 x 575 x 549 | |
Weight (kg) | 34.5 |
| 46.3 |
Helpful hints
■NO PICTURE, NO SOUND
● Check if TV is plugged in.
● Try a different channel, if OK, probably station trouble.
■POOR PICTURE, SOUND OK
●Adjust BRIGHTNESS control.
●Adjust FINE TUNING control.
●Check aerial connections.
■NO COLOUR, PICTURE OK
● Adjust COLOUR control.
● Adjust FINE TUNING control. ● Is the programme in colour ?
■WEAK PICTURE
●Check aerial connections on back of set.
●Check aerial for broken wires.
●
The following faults are not caused by the receiver:
"GHOSTS"
Reflections of signals from mountains or high buildings will cause multiple images, called "Ghosts". These abnormal conditions can be reduced to minimum by repositioning aerial or by installing new one suited for your area.
"INTERFERENCE"
Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be a temporary condition, but should this interference persist, contact your dealer.
Servicing
Your television is fully transistorised and does not contain any user serviceable components.
You must not remove the rear cover of the TV by yourself. The apparatus is working with high voltages and could damage objects or even endanger people. Leave all required repair and service jobs to an authorised service technician. He will exclu- sively use such spare parts that are complying with the same safety standards as appliciable to the original parts. The use of original spare parts can prevent fire, shock and other hazards.
Unplug the television receiver from the wall outlet and refer servicing to qualified service personnel under the following conditions:
■If the power cord or plug is damaged.
■ If liquid has been spilt into the television | ! |
receiver. |
■If television receiver has been exposed to rain or water.
■If the television receiver has been dropped or the cabinet has been damaged.
■If the television receiver exhibits a distinct change in performance.
■If the television receiver does not operate normally by following the operating instructions.
Adjust only those controls that are covered in the operating instruc- tions as improper adjustment of other controls may result in damage. This will often require extensive work by a qualified technician to restore the television receiver to normal operation.
18