REMOTE CONTROL - Analogue
Sound mute
To switch the sound from the speakers.
The sound changes as follows;
Normal volume
TV/AV switch
To switch from TV, AV1, AV2 or
AV3 mode press repeatedly.
Nicam/Bilingual selector
To switch the sound mode as follows; NICAM or MONO in the stereo programmes. A or B in the bilingual programmes. If the nicam or stereo sound reception is poor in quality, you can switch to MONO sound reception by pressing A•B button. This operates only analogue channel mode.
Direct programme selector
For direct access to programmes
using
2 and 3 numeric buttons.
Volume up/down
To adjust the sound level.
MENU
To switch on the screen display menu on/off.
Also see page 12.
Cursors
To select the sub menu items in the menu display.
Surround mode selector
To select the surround mode, ACTIVE,
MONO or OFF.
OK
To save the setting in the menu. (also refer to CS button).
Bass selection
To get an emphasised bass sound ON or OFF.
Screen mode selector
To select the screen mode, AUTO, NATURAL, ZOOM14:9, TITLE IN 14:9, ZOOM 16:9,
Standby/Power on/off
To switch the TV on and off.
Also see page 16.
Picture mode selector
To access a series of picture modes:
PERSONAL, STANDARD, ECO and
DYNAMIC.
System selector
To select the colour system in the AV mode, AUTO,PAL,NTSC 4.43 or NTSC3.58.
Channel mode selection
To enter channel number of the station directly. This operates in the analogue channel mode only. Press once to show current channel number. Press a second time to show
Programme up and down
To select the next programme number or previous programme number.
INFO
In the analogue mode, it displays the programme information such as current programme number, stereo status and remaining time if set, for about 5 seconds.
D/A selector
To switch between analogue and digital channels.
Teletext/TV selector
To switch TV, MIX and Teletext mode.
12