JVC HR-DVS2U Instant Timer, Engage ITR Mode, SET Recording, Duration, Recording Resume Function

Models: HR-DVS2U

1 80
Download 80 pages 61.91 Kb
Page 49
Image 49

EN49

 

This easy method lets you record from 30 minutes to 6 hours

Instant Timer

(VHS) or to 120 minutes (DV) (selectable in 30-min. increments)

and shuts the VCR off after recording is finished.

 

 

 

 

 

 

Recording

1

 

START RECORDING

 

Press REC on the front panel.

(ITR)

ENGAGE ITR MODE

 

Press REC again. " " blinks and 0:30 appears on the

 

2 front display panel.

 

SET RECORDING

 

DURATION

 

If you want to record for more than 30 minutes, press

 

REC to extend the time. Each press extends recording

 

3 time by 30 minutes.

REC

SP

VCR

NOTES:

You can only perform ITR using the REC button on the VCR's front panel.

After you set the ITR time, the previous display reappears.

To check the remaining time, press REC once during record- ing and the remaining time will be displayed for about 5 seconds. Be careful not to press REC again within these 5 seconds, or you will round the recording time up to the next 30 minute increment.

You can play a tape on one deck while using the other deck for Instant Timer Recording. However, remember that the deck will turn itself off when the Instant Timer Recording ends.

Recording Resume Function

If there is a power outage during recording (including Instant Timer Recording and timer recording), the record- ing will resume automatically when power is restored to the VCR. (No setting is required for this function.)

Page 49
Image 49
JVC HR-DVS2U manual Instant Timer, Engage ITR Mode, SET Recording, Duration, Recording Resume Function