![](/images/new-backgrounds/1310762/31076293x1.webp)
When programmes overlap each other
If "PROGRAM NOT COMPLETED PROGRAM OVERLAP" appears, you have another programme overlapping the programme you have just made.
The Program Check screen appears and conflicting programmes will start blinking.
| VHS |
|
|
| |
PROGRAM NOT COMPLETED | PR START | STOP | CH | DATE | |
1 | 8:00P | 11:00 | 12 | 12/24 | |
PROGRAM OVERLAP | 2 | 10:00A | 10:45 | 40 | 12/25 |
3 | 11:30P | 1:00 | 125 | 12/25 | |
| 4 | 9:00P | 10:00 | 10 | 12/24 |
| 5 |
|
|
|
|
| 6 |
|
|
|
|
| DV |
|
|
|
|
| (5,∞), THEN (3) (PROG.) : END |
EX. Programme 1 (you have just made) and Programme 4 overlap each other on the VHS deck.
CONFIRM OVERLAPPING |
PROGRAMMES |
1 Overlapping programmes blink on the screen. |
SELECT PROGRAMME TO |
EN
47
ATTENTION
If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.
Pattern 1: The program with the lower program number will be recorded.
10:00 | 11:00 | 12:00 | |||||
Program 1 |
| CH10 |
|
|
|
| |
Program 2 |
|
|
|
|
|
| Not recorded |
|
| CH40 |
|
|
|
Pattern 2: The program that is broadcast earlier will be recorded.
10:00 | 11:00 | 12:00 | ||||
Program 1 |
| CH10 |
|
|
|
|
Program 2 |
|
|
| Not recorded | ||
CH40 |
|
|
Pattern 3: The program that is broadcast earlier will be recorded, followed by the remaining portion of the other program.
10:00 | 11:00 | 12:00 | ||
Program 1 |
| CH10 |
|
|
|
| Program 2 |
|
|
|
|
| CH40 |
Not recorded
2 | MODIFY |
|
|
|
|
Press %fi, then press OK or #. |
|
|
| ||
|
| ||||
● You can only select one of the overlapping | |||||
programmes. |
|
|
|
| |
| NOTE: |
|
|
|
|
| If you do not mind this overlap, press PROG to finish | ||||
| the timer programme setting. See “ATTENTION” to the | ||||
| right. Without doing anything for about 1 minute, the | ||||
| VCR will finish the timer programing. |
|
|
| |
|
|
|
|
| |
| CANCEL OR CHANGE |
|
|
| |
| PROGRAMME SETTING |
|
| ||
| To cancel a programme, | VHS PROGRAM 4 | |||
| press CANCEL when the | ||||
|
|
|
|
| |
3 Program screen you do not | START |
| STOP | ||
9:00 PM | = 10:00PM | ||||
| want is shown. "PRO- | DATE |
| CH | |
| GRAM COMPLETED" |
| |||
| 12/24/00 |
| 10 SP | ||
| appears on the TV screen | SUN |
|
|
|
| for about 5 seconds, then | PRESS (CANCEL) TO CANCEL |
| ||
| normal screen appears. | PRESS (OK) TO CONFIRM |
| ||
| PRESS (PROG.) TO END |
| |||
| To change a programme, |
|
|
|
|
| press the appropriate button: | ||||
| DATE | ) when the | |||
| Program screen on which you want to make changes is | ||||
| shown, then press OK. |
|
|
|
|
| "PROGRAM COMPLETED" appears on the TV screen | ||||
| for about 5 seconds, then normal screen appears. |
NOTE:
If the overlap is not yet solved or another overlap occurs with the timer programme setting after making the last correction on a programme, the conflicting programmes will be shown on the Program Check screen again. Repeat the above steps again until the overlap is solved.
NOTE:
If the programme you have just made and "DV" are blinking, there is a conflicting programme1 on the DV deck.
Press %fi to move the highlight bar to "DV", then press OK or #.
DV Programme Check
2screen appears. Cancel or change programme setting as described in step 2 and 3 in the left column.
VHS |
|
|
| |
PR START | STOP | CH | DATE | |
1 | 8:00P | 11:00 | 12 | 12/24 |
2 | 10:00A | 10:45 | 40 | 12/25 |
3 | 11:30P | 1:00 | 125 | 12/25 |
4 | 9:00P | 10:00 | 10 | 12/24 |
5 |
|
|
|
|
6 |
|
|
|
|
DV
(5,∞), THEN (3) (PROG.) : END
DV |
|
|
|
|
PR START | STOP | CH | DATE | |
1 | 9:00P | 10:00 | 12 | 12/24 |
2
3
4
5
6 VHS
(5,∞), THEN (3) (PROG.) : END