JVC HR-DVS2U manual 38 EN, Access VHS Mode SET, Select S-VHS Mode, VHS Super VHS, S-VHS

38EN

PLAYBACKANDRECORDINGFEATURES (cont.)

S-VHS ET

1 DV S-VHS

3

MENU

OK

S-VHS (Super VHS), S-VHS

ET and VHS (VHS deck only)

Your VCR can record in S-VHS, S-VHS ET or VHS.

S-VHS allows you to make high quality video recordings with a horizontal resolution of 400 lines. This compares with the 240 lines of resolution of normal VHS recordings. To achieve the highest quality picture we recommend that you record in S-VHS mode.

By using S-VHS ET it is possible to record and play back with S- VHS picture quality on VHS cassettes with this VCR. For details, refer to page 39.

To record in S-VHS;

●perform the steps 1 – 4 in the right column to set the "S-VHS MODE" to "ON".

●then, insert a cassette marked "S-VHS", the S-VHS indicator will light on the display panel.

The S-VHS recording mode will be automatically selected.

To record in S-VHS ET on a VHS high grade cassette;

●press S-VHS ET and set to "ON".  "Super VHS ET" on page 39.

To record in VHS;

●insert a cassette marked "VHS".

●press S-VHS ET on the VCR. You can check the current setting ("S-VHS ET : ON" or "S-VHS ET : OFF") if "SUPERIMPOSE" is set to "ON" ( pg. 27). If "S-VHS ET : ON" appears on the TV screen, press S-VHS ET again in about 5 seconds to set it to

"OFF".

The VHS recording mode will be automatically selected regardless of the S-VHS mode setting.

To record in VHS on an S-VHS cassette;

●insert the cassette marked "S-VHS", the S-VHS indicator will light on the display panel.

●then, perform the steps 1 – 4 in the right column to set the

"S-VHS MODE" to "OFF"; the S-VHS indicator will go out. The VHS recording mode will be selected.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS VHS MODE SET
2	SCREEN
	Move the highlight bar (arrow) to "VHS MODE SET" by
	pressing %fi, then press OK or #.
3	SELECT S-VHS MODE
	Move the highlight bar				VHS MODE SET
	(arrow) to "S-VHS MODE"				=S-VHS MODE	ON
	by	pressing %fi, then press			VIDEO CALIBRATION	ON
			#	to set to "ON" or	PICTURE CONTROL	AUTO
	OK or				FRONT AUX INPUT	VIDEO
	"OFF".				AUTO SP=LP TIMER	OFF
					BLUE BACK	ON
					NEXT PAGE
					SELECT WITH (5,∞) AND (OK)
					PRESS (MENU) TO END
	RETURN TO NORMAL
4	SCREEN
	Press MENU.

NOTE:

When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS indicator lights on the display panel regardless of the "S-VHS MODE" setting.

NOTE:

Tapes recorded in S-VHS or S-VHS ET mode can not be played back successfully on normal VHS VCRs.