JVC HR-DVS2U manual 26 EN

26EN

PLAYBACKANDRECORDINGFEATURES (cont.)

Manual Tracking

(VHS deck only)

Once playback begins, the VCR’s automatic tracking function is engaged. If tracking noise appears in the picture, you can override this and make the adjustment manually.

1	T	W
	2	3

2

4 5 6

7 8 9

04

CH

1 DV S-VHS

FF

REW

3

OK

1

2

3

ENGAGE MANUAL

TRACKING MODE

During playback, press the CH + and – buttons on the VCR's front panel simultaneously to cancel the automatic tracking mode and enable manual tracking adjust.

ADJUST MANUAL

TRACKING

Press CH + or – on the VCR's front panel or remote. Press briefly for fine adjust, or press and hold for coarse adjust. Watch the screen and continue adjusting until optimum picture and sound quality are achieved.

RE-ENGAGE AUTOMATIC TRACKING

Press the CH + and – buttons on the VCR's front panel simultaneously.

●When automatic tracking is re-engaged, Video Calibration is automatically activated.

NOTES:

●To obtain a noiseless still picture it may be necessary to adjust tracking in slow playback and then engage Pause.

●Manual tracking is possible during hands-free slow-motion. During hands-free slow-motion playback, simply press CH + or – on the VCR's front panel or remote to adjust tracking.

Index Search (VHS deck only)

Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function.

1

2

START SEARCH

While the tape is stopped, press ™or £.

ACCESS DISTANT CODE

To access a recording 2–9 index codes away, press

™or £repeatedly until the correct number is

displayed on screen (only if "SUPERIMPOSE" is set to "ON" ( pg. 27). Playback begins automatically when the desired recording is located.

●If necessary press REW or FF when play starts to search visually to find the very beginning of the desired program.

NOTE:

An index code is not placed on the tape when recording is paused and then resumed.