JVC HR-DVS2U manual SET RECORDER’S Input Mode, Select Edit for PIC, Start Player, Start Recorder

CH

T	W	3
1	2
		2
4	5	6
7	8	9
NUMBER "0"	0	4
1	DV	S-VHS

3

MENU

OK

EN57

SET RECORDER’S INPUT

MODE

4 Set to "AUX". With this VCR, press the NUMBER key "0" and/or CH to select depending on the connector being used – "L-1" for the rear AUDIO/VIDEO IN connector, or "F-1" for the front AUDIO/VIDEO IN connector.

NOTE:

If you use your VCR as the recorder and have connected another VCR to your VCR's S-VIDEO IN connector, you need to set "REAR AUX INPUT" to "S-VIDEO" at the Mode Set screen. Follow steps 5, 8 and 9 from the "Edit From A Camcorder" section ( pg. 55).

	SELECT “EDIT” FOR PIC-
	TURE CONTROL SET MODE
5	(VHS DECK ONLY)
	Follow the “Picture Control” section on page 29, then
	select “EDIT.”
	NOTE:
	When you select “EDIT” to dub tapes, be sure to select
	“AUTO” or (“NORM” when “VIDEO CALIBRATION” is
	set to “OFF”) after you finish dubbing the tapes.

6	START PLAYER
	Set to its play mode.
	NOTE:
	If the player is equipped with a superimpose/OSD
	disable feature then set "SUPERIMPOSE" to "OFF"
	before pressing PLAY ( pg. 27).

START RECORDER

7 Set to its record mode.

NOTE:

If you use an auxiliary input to connect a cable box or DBS receiver, make sure that the correct AUX INPUT ("VIDEO" or "S-VIDEO") is selected after you have finished editing

( steps 5 – 9, page 55).

OUTPUT1 Setting

1Set "OUTPUT1" to the appropriate mode depending on the selection of the playing deck (VHS or DV) for editing.

2Press MENU to access the Main Menu screen.

3Press CH +/– or %fi to move the highlight bar (arrow) to "MODE SET", then press OK or #.

4Press CH +/– or %fi to move the highlight bar (arrow) to "OUTPUT1". Press OK or # to select "AUTO", "VHS" or "DV".

a–AUTO	: The VCR outputs the signals from the deck being used automatically. The
	superimposed indication is also output.
b–VHS	: The VCR outputs only the signals from the VHS deck. The superimposed
	indication is not output.
c–DV	: The VCR outputs only the signals from the DV deck. The superimposed
5	indication is not output.

Press MENU to return to normal screen.

MODE SET
REAR AUX INPUT	VIDEO
= OUTPUT1	AUTO
2ND AUDIO RECORD	OFF
AUTO TIMER	OFF
SUPERIMPOSE	ON

SELECT WITH (5,∞) AND (OK)

PRESS (MENU) TO END