JVC HR-DVS2U Access VHS Mode SET Screen, Select Digital TBC/NR SET Mode, Digital R3 VHS deck only

Digital R3 (VHS deck only)

Digital R3 picture system applies edge correction to the luminance signal to enhance detail.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS VHS MODE SET
2	SCREEN
	Move the highlight bar (arrow) to "VHS MODE SET" by
	pressing %fi, then press OK or #.
	SELECT DIGITAL R3 SET
3	MODE
	Move the highlight bar			VHS MODE SET
	(arrow) to "DIGITAL R3" by			S-VHS MODE	OFF
	pressing %fi, then press			VIDEO CALIBRATION	ON
	OK or	#	to set to "ON".	PICTURE CONTROL	AUTO
				FRONT AUX INPUT	VIDEO
				AUTO SP=LP TIMER	OFF
				BLUE BACK	ON
				= NEXT PAGE
				SELECT WITH (5,∞) AND (OK)
				PRESS (MENU) TO END
				PREVIOUS PAGE
				DIGITAL TBC/NR	OFF
				=VIDEO STABILIZER	ON
				=DIGITAL R3	ON
				AUDIO MONITOR	HI-FI
				SELECT WITH (5,∞) AND (OK)
				PRESS (MENU) TO END
	RETURN TO NORMAL
4	SCREEN
	Press MENU.

NOTES:

●Normally it is recommendable to keep "DIGITAL R3" set to "ON".

●Depending on the type of tape being used, picture quality may be better with "DIGITAL R3" set to "OFF".

●If you use this VCR as the player for editing, be sure to set "DIGITAL R3" to "OFF" before starting.

EN31

Digital TBC/NR (VHS deck only)

Your VCR is equipped with the Digital TBC (Time Base Corrector) that removes jitter from fluctuating video signals to deliver a stable picture even with old tapes and rental cassettes. The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables clear picture reproduction is also linked to this function.

* The default setting is "ON".

We recommend that you use the Digital TBC feature when...

... playing back a tape recorded on a camcorder.

... playing back a tape repeatedly used.

... using this VCR as the player for editing.

ACCESS MAIN MENU

SCREEN

1 Press MENU.

ACCESS VHS MODE SET

SCREEN

2 Move the highlight bar (arrow) to "VHS MODE SET" by pressing %fi, then press OK or #.

SELECT DIGITAL TBC/NR

SET MODE

3 Move the highlight bar (arrow) to "DIGITAL TBC/NR" by

pressing %fi, then press OK or # to set to "ON".

RETURN TO NORMAL

SCREEN

4 Press MENU.

NOTES:

●If you play back a tape recorded under poor TV reception condition, there may be cases where the picture becomes more stable with Digital TBC/NR set to off.

●When Digital TBC/NR is set to on, if you play back a tape where certain types of signals are recorded (using a PC or some character generators), the playback picture may be distorted. If this is the case, turn off Digital TBC/NR.

●Digital TBC/NR and Video Stabilizer ( pg. 30) cannot be used at the same time; if you turn on Digital TBC/NR when "VIDEO STABILIZER" is set to "ON", Video Stabilizer will be automatically turned "OFF". Make sure Digital TBC/NR is off when you want to use Video Stabilizer.