JVC HR-DVS2U manual 54 EN, Make Connections, Load a Cassette

54EN

EDITING(cont.)

Edit From A Camcorder

A		VIDEO IN	AUDIO IN
	Recorder		Your VCR

S-VIDEO IN

Audio/Video cable

(supplied)PAUSE connector

You can use a camcorder as the player and your VCR as the recorder. You can perform digital dubbing if you connect a device such as a camcorder which has a DV output/input connector. Because the signals are digital, there is no loss of video or audio quality as a result of editing.

1	MAKE CONNECTIONS
	A If the camcorder has no DV OUT/IN connector:
	Connect an AV cable between the camcorder’s
	VIDEO OUT and AUDIO OUT connectors and your
	VCR’s VIDEO IN and AUDIO IN connectors.

●If connecting a camcorder with an S-VIDEO output connector, it is recommended to use the S-VIDEO connection to minimize picture degradation while editing.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling your VCR. The mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector.

●If connecting to a camcorder with a monaural output, connect the audio output connector on the camcorder to AUDIO IN L of the VCR.

BIf the camcorder has a DV OUT/IN connector: Connect the camcorder’s DV OUT/IN connector to the VCR’s DV IN/OUT connector.

LOAD A CASSETTE

2 Insert the cassette to be recorded on into the recorder.

VIDEO OUT

Player

S-VIDEO cable (supplied)

SELECT RECORDING DECK

3 Press S-VHSor DV.

AUDIO OUT
Camcorder	Mini-plug cable
S-VIDEO OUT	(not supplied)
	(JVC camcorder only)
EDIT

B

Recorder Your VCR

DV IN/OUT PAUSE connector

DV Cable VC-VDV204U (not provided)

		NOTES:
Player		● When connecting this recorder to a device equipped with a
		DV input connector, be sure to use the optional DV cable
		(VC-VDV204U).
DV Camcorder DV OUT/IN	Mini-Plug Cable	● When you are editing through the DV IN/OUT connector, the
	(not provided)	recorder will stop if the player begins playing a blank portion
	(JVC camcorder only)	of tape or the signal is interrupted.
EDIT