MENU OPERATION - Anologue channels
Many of your TV’s functions are controlled through the menu function.
MENU
Picture Brightness Contrast Colour Sharpness Text bright memory?
Tint (only when NTSC is detected)
Sound Volume
Bass
Treble
Balance
Timer |
|
|
|
| OFF Timer |
|
|
|
| ||||
|
|
|
|
|
|
| |||||||
Setting |
|
| Child lock |
|
| ON/OFF |
|
| |||||
|
|
|
|
|
| ||||||||
|
|
|
|
| AV2 |
|
|
|
| ||||
|
|
|
|
|
|
|
| ||||||
Preset |
|
| Tuning |
|
|
|
|
|
| ||||
|
|
|
|
| Swap |
|
|
|
| ||||
|
|
|
|
| Fine Tuning | SEMI | AUTO | ||||||
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
| CH:34 | CH:34 | ||
|
|
|
|
|
|
|
|
|
| P:04 | P:04 | ||
|
|
|
|
|
|
|
|
|
| Skip: OFF | Skip OFF | ||
|
|
|
|
|
|
|
|
|
| Memory? | Memory? | ||
During the menu operation the following buttons are used.
u: To enter the menu function.
: To go back and to exit the menu function.
: To navigate up and down in the menus.
+ | : To navigate forwards to the next screen or to |
| activate settings. |
Picture menu
1.Press the MENU button to select main menu, select Picture using e or d buttons.
Picture | Brightness |
Sound | Contrast |
Timer | Colour |
Setting | Sharpness |
Preset | Text bright |
| memory? |
2.Press 1 to enter. Select and adjust to obtain the best picture settings for your environment.
Text bright : Brightness of Teletext screen
MINIMUM / CENTRE / MAXIMUM.
Tint : Colour phase if NTSC equipment is detected.
■Storing picture preferences
If you have altered any of the settings in the Picture menu you can store them. You can be recall again later.
In the picture menu press 6 to select memory.
Brightness
Contrast
Colour
Sharpness
memory ? | memory |
Press the 1 button, a tick appears in the box and the settings are stored.
Sound menu
1.Press the MENU button to select main menu and using 5 or
6 select Sound.
2.Select and adjust to obtain the best sound settings for your environment using 5, 6, 1 or 2.
Picture |
|
|
Sound | Volume | 10 |
Timer | Bass |
|
Treble |
| |
Setting |
| |
Balance |
| |
Preset |
| |
|
|
3.Press MENU button repeatedly to exit.
Timer menu
■Off-timer setting
The Off timer will switch the TV set into the standby mode when the selected time has elapsed.
1.Press the MENU button to select main menu. Press 5 or 6to select Timer.
2.Press 1 to enter OFF Timer.
3.Press 1 button, and highlight time setting column by pressing the 5 or 6 buttons.
time setting column |
|
| |
Not set | Set |
When the time setting column is selected its colour changes to yellow. The time changes in 30 minute steps.The maximum time is 2:00hrs. When you are ready to store your settings press the 1 button and the setting column numbers colour changes to green. The tick appears as shown above and its colour changes to yellow.
If you have set the off timer, then one minute before the TV switches, a display appears on the screen.
4.Press the MENU button repeatedly to exit the menu.
✐If the TV set is switched off by the Mains Switch 4, or you enter the preset mode, the timer settings will be cancelled.
Setting menu
■Child lock
You can prevent small children from operating the TV with the front buttons of the TV set.
1.Press the MENU button and select main menu.
2. Press 5 or 6to select Setting, press 1 to enter Child lock
/ AV2 menu.
Picture | OFF | |
| ||
Sound |
| |
Timer | Child lock ON | |
Setting | ||
AV2 | ||
| ||
Preset |
|
3.Press 5 or 6to select Child lock, press 1 to select ON or
OFF.
The child lock mode will be reset to “OFF” when the TV set is switched off with the Mains ON/OFF 3 switch.
Setting menu
■Setting of AV2 input mode
If you use a VCR which has
1.Press 6 to select AV2, press 1 or 2 to select
VIDEO.
Picture |
| |
Sound | Child lock | |
Timer |
| |
|
| |
Setting | AV2 | VIDEO |
Preset |
|
|
2.Press MENU button repeatedly to exit.
13