Chapter 6 - Basic Configuration Guide | 23 |
|
|
2. Set basic IP parameters for Ethernet 0.
Dual Ethernet | Single Ethernet |
TCP/IP Routing: Ethernet 0
To access this dialog box, select TCP/IP Routing under Ethernet 0 in the Device View.
A.Click the IP Routing radio button.
B.Enter the internal TCP/IP address you have assigned the IntraPort 2/2+. Verify that you have the IP Address, the Net- work IP Subnet Mask and the Network IP Broadcast Mask correctly entered. Incorrect information can cause difficult to diagnose problems or disable the IntraPort until the informa- tion is corrected.
C.If you are using RIP, select the correct version from the Rout- ing Protocol
ϖNote: Routing protocol options, OSPF, and all parameters under the Options button are advanced configuration parameters and are not covered here. Refer to the CompatiView Management Software Reference Manual for more information.
D.Click OK.