Compatible Systems 2+ manual IKE Configuration Transform List

Page 45

Chapter 6 - Basic Configuration Guide

39

 

 

will only initiate tunnel establishment attempts and will not respond to them.

If Respond is selected, this Tunnel Partner will use IKE, but will only respond to tunnel establishment attempts and will not initiate them.

B.Enter the Shared Key. This is a shared alphanumeric secret that is used to generate session keys.

C.Select the authentication and encryption algorithms to be used for tunnel sessions using the IKE Configuration Transform list box.

Click on the Add... button in the Transform section to access the IKE Configuration Transform List dialog box.

IKE Configuration Transform List

The default settings of MD5 for Authentication and DES for Encryption are adequate for most setups. Click OK.

D.In the IKE Key Management dialog box, you may click on the PFS checkbox to add additional security parameters during tunnel sessions. (This is optional.)

ϖNote: For more information regarding encryption, authentication, and Perfect Forward Secrecy, refer to the CompatiView Management Software Reference Guide.

E.Click OK.

Image 45
Contents Page Page Getting Help with the IntraPort 2/2+ VPN Access Server Network InstallationIntroduction Getting StartedBasic Configuration Guide Appendix a Shipping DefaultsParameters Systems InformationAppendix F Terms and Conditions Pin Outs for DB-25 Male to DB-25 Female RS-232 DataPage IntraPort 2/2+ VPN Access Server Installa- tion Overview About the IntraPort 2/2+ VPN Access ServerIntroduction IntroductionCompatiView Software Installation Network InstallationCommand Line Preparation Basic Configuration GuideAppendices Introduction Alternate Protocols and Security ParametersPage Getting Help with the IntraPort 2/2+ VPN Access Server Warranty and ServiceGetting Started Few NotesSupplied with the IntraPort 2/2+ VPN Access Server Needed for InstallationWhat You Will Need To Get Started VPN Client Software Requirements Ethernet Connection RequirementsPage Network Installation Connecting the Server to the EthernetPlacing the Server Powering Up the Server Connecting a Management ConsoleSystem Requirements CompatiView for WindowsTransport Protocols and CompatiView Installation and OperationCompatiView Software Installation Page Out-of-Band Command Line Management Command Line ManagementSetting Up Telnet Operation Temporarily Reconfiguring a Host for Command Line ManagementIP Ethernet 0 section Page Setup Options Basic Configuration GuideDiagram of Dual-Ethernet Setup Diagram of Dual-Ethernet SetupDiagram of Single Ethernet Setup Diagram of Single-Ethernet SetupConfiguration Using CompatiView VPN Client Tunnel SettingsTurn off AppleTalk and IPX optional Dual Ethernet Single Ethernet TCP/IP Routing Ethernet Dual Ethernet Set basic IP parameters for Ethernet Single Ethernet Turn IP off on EthernetIP Connection Ethernet Basic Configuration Guide Set an IP Gateway for Ethernet IP Static RoutesDual Ethernet Static Route Single Ethernet Static Route Basic Configuration Guide IPSec Gateway Basic Configuration Guide Set an IPSec GatewayIKE Policy Set an IKE PolicyVPN Group Configuration General Tab Basic Configuration Guide Set up VPN Group ConfigurationsVPN Group Configuration IKE Configuration Tab IKE Configuration Transform List Basic Configuration Guide Basic Configuration Guide VPN Group Configuration IPX Connection Tab Basic Configuration Guide Set up VPN Users VPN User ConfigurationVPN User Save the configuration to a file and download to the device Add a VPN Port Set up the Tunnel PartnerAdd VPN Port Tunnel Partner VPN #IKE Key Management Set up Key ManagementIKE Configuration Transform List Save the configuration to a file and download to the device Example Basic Configuration Using Command LineSingle Ethernet Setup Example Edit IP Static Append Configure general Basic Configuration Guide Set up VPN Group Configurations Configure vpn group basic vpn config Save the Configuration and download it to the device Use the configure command to add a VPN Port Configure tunnel partner vpn IPX Protocol Required for IPXSuggested for IPX Setting the IntraPort for a Radius Server Setting up Radius AuthenticationAppleTalk Protocol Required for AppleTalkRadius Server User Authentication Settings Setting up SecurID Authentication ACE/Server Settings Setting the IntraPort for an ACE/ServerSaving a Configuration File to Flash ROM Page Ethernet Interfaces Appendix a Shipping DefaultsAppendix B Connector and Cable Pin Outs Appendix B Connector and Cable Pin OutsAppendix C Security Dynamics ACE/Server Information Page IntraPort 2/2+ VPN Access Servers LED Patterns Appendix D LED Patterns and Test Switch Settings IntraPort 2 Connections/Users LEDsIntraPort 2+ Connections/Users LEDs IntraPort 2/2+ VPN Access Server Switch Settings IntraPort 2 Special IndicatorsIntraPort 2+ Special Indicators Page Compatible Systems WWW Server Appendix E Downloading Software From Compatible SystemsPage Appendix F Terms and Conditions Appendix F Terms ConditionsPage Appendix F Terms and Conditions

2+, 2 specifications

Compatible Systems 2,2+ is a cutting-edge framework designed to enhance interoperability and compatibility across various technological platforms and systems. Built on a robust foundation, this system aims to simplify the integration of old and new technologies, ensuring organizations can effectively leverage their existing infrastructures while embracing innovations.

One of the primary features of Compatible Systems 2,2+ is its modular architecture. This design allows organizations to implement only the components they need, significantly reducing costs and complexities associated with full-scale system overhauls. It promotes flexibility, enabling businesses to customize solutions according to their specific operational requirements without compromising performance or security.

Another standout characteristic is its adherence to open standards. By supporting widely accepted protocols and formats, Compatible Systems 2,2+ significantly reduces the barriers to integration. This feature facilitates communication between different systems and devices, enabling seamless data exchange and promoting collaboration across varied platforms. Organizations can easily connect disparate systems, fostering a unified operational environment.

The introduction of advanced connectivity features, such as API management and microservices architecture, distinguishes Compatible Systems 2,2+ from traditional systems. This technology allows for more granular control over data flows and interactions, enhancing agility in development and deployment. Organizations can quickly adapt to changing market demands, ensuring they remain competitive in a fast-paced digital landscape.

Security is another critical concern addressed by Compatible Systems 2,2+. The framework incorporates robust security protocols to safeguard data integrity and protect against unauthorized access. With features such as encryption, authentication, and authorization mechanisms, organizations can trust that their sensitive information is well-protected.

Moreover, Compatible Systems 2,2+ includes comprehensive support for analytics and monitoring. By integrating data analytics tools, this system allows organizations to gain insights into system performance and user behavior, facilitating informed decision-making. This capability not only enhances operational efficiency but also aids in predictive maintenance, reducing downtime and improving overall productivity.

In conclusion, Compatible Systems 2,2+ presents a versatile and secure solution for organizations looking to enhance compatibility and interoperability across their technological ecosystems. With its modular architecture, support for open standards, advanced connectivity features, and robust security measures, it stands as a leading choice for businesses aiming to navigate the complexities of modern technology integration successfully. Embracing Compatible Systems 2,2+ can empower organizations to innovate while preserving their valuable technological investments.