Compatible Systems 2+ manual Basic Configuration Guide

Page 39

Chapter 6 - Basic Configuration Guide

33

 

 

same network as Ethernet 0 or a subinterface thereof). Also, they cannot conflict with those used for any other VPN Groups.

ϖNote: For large numbers of users (i.e., over 50), it’s recommended that the block of addresses be specified as a Local IP Net because address administration is easier. Using a Start IP Address is recommended for smaller numbers of users because the routing setup is simpler. See the CompatiView Management Software Reference Guide for more information on the difference between the Start IP Address and the Local IP Net.

•Click the Add... button in the Allow Connections to area. An Add IP Address pop-up box will appear. THIS IS A VERY IMPORTANT FIELD. The values you enter here determine what TCP/IP traffic is tunneled, or, more com- monly, where a client who belongs to this VPN Group Configuration can go on your network. If you enter the internal network (in the dual Ethernet example, 192.168.233.0/24), all traffic from a client going to the internal network will be tunneled through the IntraPort 2/2+. This is the most common configuration.

As a special case, the entry 0.0.0.0/0 will send all IP traffic through the tunnel, although the Exclude Local LAN from Tunnel checkbox on the General tab can still be used to exclude LAN traffic if desired.

There can be multiple entries, including individual addresses (i.e. hosts).

G.If you will not be tunneling IPX traffic, you are done with the VPN Group configuration. Click OK and skip to the VPN User Configuration section.

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Page Page Getting Started Network InstallationGetting Help with the IntraPort 2/2+ VPN Access Server IntroductionBasic Configuration Guide Appendix a Shipping DefaultsParameters Pin Outs for DB-25 Male to DB-25 Female RS-232 Data InformationSystems Appendix F Terms and ConditionsPage Introduction About the IntraPort 2/2+ VPN Access ServerIntraPort 2/2+ VPN Access Server Installa- tion Overview IntroductionBasic Configuration Guide Network InstallationCompatiView Software Installation Command Line PreparationAppendices Introduction Alternate Protocols and Security ParametersPage Few Notes Warranty and ServiceGetting Help with the IntraPort 2/2+ VPN Access Server Getting StartedSupplied with the IntraPort 2/2+ VPN Access Server Needed for InstallationWhat You Will Need To Get Started VPN Client Software Requirements Ethernet Connection RequirementsPage Network Installation Connecting the Server to the EthernetPlacing the Server Powering Up the Server Connecting a Management ConsoleSystem Requirements CompatiView for WindowsTransport Protocols and CompatiView Installation and OperationCompatiView Software Installation Page Out-of-Band Command Line Management Command Line ManagementSetting Up Telnet Operation Temporarily Reconfiguring a Host for Command Line ManagementIP Ethernet 0 section Page Setup Options Basic Configuration GuideDiagram of Dual-Ethernet Setup Diagram of Dual-Ethernet SetupDiagram of Single Ethernet Setup Diagram of Single-Ethernet SetupConfiguration Using CompatiView VPN Client Tunnel SettingsTurn off AppleTalk and IPX optional Dual Ethernet Single Ethernet TCP/IP Routing Ethernet Dual Ethernet Set basic IP parameters for Ethernet Single Ethernet Turn IP off on EthernetIP Connection Ethernet Basic Configuration Guide Set an IP Gateway for Ethernet IP Static RoutesDual Ethernet Static Route Single Ethernet Static Route Basic Configuration Guide IPSec Gateway Basic Configuration Guide Set an IPSec GatewayIKE Policy Set an IKE PolicyVPN Group Configuration General Tab Basic Configuration Guide Set up VPN Group ConfigurationsVPN Group Configuration IKE Configuration Tab IKE Configuration Transform List Basic Configuration Guide Basic Configuration Guide VPN Group Configuration IPX Connection Tab Basic Configuration Guide Set up VPN Users VPN User ConfigurationVPN User Save the configuration to a file and download to the device Tunnel Partner VPN # Set up the Tunnel PartnerAdd a VPN Port Add VPN PortIKE Key Management Set up Key ManagementIKE Configuration Transform List Save the configuration to a file and download to the device Example Basic Configuration Using Command LineSingle Ethernet Setup Example Edit IP Static Append Configure general Basic Configuration Guide Set up VPN Group Configurations Configure vpn group basic vpn config Save the Configuration and download it to the device Use the configure command to add a VPN Port Configure tunnel partner vpn IPX Protocol Required for IPXSuggested for IPX Required for AppleTalk Setting up Radius AuthenticationSetting the IntraPort for a Radius Server AppleTalk ProtocolRadius Server User Authentication Settings Setting up SecurID Authentication ACE/Server Settings Setting the IntraPort for an ACE/ServerSaving a Configuration File to Flash ROM Page Ethernet Interfaces Appendix a Shipping DefaultsAppendix B Connector and Cable Pin Outs Appendix B Connector and Cable Pin OutsAppendix C Security Dynamics ACE/Server Information Page IntraPort 2/2+ VPN Access Servers LED Patterns Appendix D LED Patterns and Test Switch Settings IntraPort 2 Connections/Users LEDsIntraPort 2+ Connections/Users LEDs IntraPort 2/2+ VPN Access Server Switch Settings IntraPort 2 Special IndicatorsIntraPort 2+ Special Indicators Page Compatible Systems WWW Server Appendix E Downloading Software From Compatible SystemsPage Appendix F Terms and Conditions Appendix F Terms ConditionsPage Appendix F Terms and Conditions

2+, 2 specifications

Compatible Systems 2,2+ is a cutting-edge framework designed to enhance interoperability and compatibility across various technological platforms and systems. Built on a robust foundation, this system aims to simplify the integration of old and new technologies, ensuring organizations can effectively leverage their existing infrastructures while embracing innovations.

One of the primary features of Compatible Systems 2,2+ is its modular architecture. This design allows organizations to implement only the components they need, significantly reducing costs and complexities associated with full-scale system overhauls. It promotes flexibility, enabling businesses to customize solutions according to their specific operational requirements without compromising performance or security.

Another standout characteristic is its adherence to open standards. By supporting widely accepted protocols and formats, Compatible Systems 2,2+ significantly reduces the barriers to integration. This feature facilitates communication between different systems and devices, enabling seamless data exchange and promoting collaboration across varied platforms. Organizations can easily connect disparate systems, fostering a unified operational environment.

The introduction of advanced connectivity features, such as API management and microservices architecture, distinguishes Compatible Systems 2,2+ from traditional systems. This technology allows for more granular control over data flows and interactions, enhancing agility in development and deployment. Organizations can quickly adapt to changing market demands, ensuring they remain competitive in a fast-paced digital landscape.

Security is another critical concern addressed by Compatible Systems 2,2+. The framework incorporates robust security protocols to safeguard data integrity and protect against unauthorized access. With features such as encryption, authentication, and authorization mechanisms, organizations can trust that their sensitive information is well-protected.

Moreover, Compatible Systems 2,2+ includes comprehensive support for analytics and monitoring. By integrating data analytics tools, this system allows organizations to gain insights into system performance and user behavior, facilitating informed decision-making. This capability not only enhances operational efficiency but also aids in predictive maintenance, reducing downtime and improving overall productivity.

In conclusion, Compatible Systems 2,2+ presents a versatile and secure solution for organizations looking to enhance compatibility and interoperability across their technological ecosystems. With its modular architecture, support for open standards, advanced connectivity features, and robust security measures, it stands as a leading choice for businesses aiming to navigate the complexities of modern technology integration successfully. Embracing Compatible Systems 2,2+ can empower organizations to innovate while preserving their valuable technological investments.
Top Page Image Contents