Compatible Systems 2+ manual Set up Key Management, IKE Key Management

Page 44

38

Chapter 6 - Basic Configuration Guide

 

 

C.If you are using both Ethernet ports, then the Bind To interface should be set to Ethernet 1. For single Ethernet setups, it should be Ethernet 0. This specifies which interface on this device will act as the end point for the tunnels defined by this configuration. Packets sent from this device to the remote Tun- nel Partner will use this interface’s IP address as a source address.

D.Click OK.

3. Set up Key Management

These settings control how the local Tunnel Partner will identify and authenticate the remote Tunnel Partner. IKE Key Management is recommended.

IKE Key Management

Once a VPN port has been created, you may access the IKE Key Management dialog box by clicking on the port’s icon in the Device View and selecting IKE Key Management.

A.From the pull-down menu, select the Key Manage method to use for this tunnel.

If Auto key management is selected, IKE will be used to allow two devices to negotiate between themselves which encryption and authentication methods will be used for the tunnel.

If Manual is selected, this Tunnel Partner will not use IKE, and the tunnel’s encryption and authentication parameters must be manually set in the Manual Key Management dialog box, which is not described in this guide.

If Initiate is selected, this Tunnel Partner will use IKE, but

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Page Page Network Installation Getting Help with the IntraPort 2/2+ VPN Access ServerIntroduction Getting StartedParameters Basic Configuration GuideAppendix a Shipping Defaults Information SystemsAppendix F Terms and Conditions Pin Outs for DB-25 Male to DB-25 Female RS-232 DataPage About the IntraPort 2/2+ VPN Access Server IntraPort 2/2+ VPN Access Server Installa- tion OverviewIntroduction IntroductionNetwork Installation CompatiView Software InstallationCommand Line Preparation Basic Configuration GuideIntroduction Alternate Protocols and Security Parameters AppendicesPage Warranty and Service Getting Help with the IntraPort 2/2+ VPN Access ServerGetting Started Few NotesWhat You Will Need To Get Started Supplied with the IntraPort 2/2+ VPN Access ServerNeeded for Installation Ethernet Connection Requirements VPN Client Software RequirementsPage Placing the Server Network InstallationConnecting the Server to the Ethernet Connecting a Management Console Powering Up the ServerCompatiView for Windows System RequirementsInstallation and Operation Transport Protocols and CompatiViewCompatiView Software Installation Page Command Line Management Out-of-Band Command Line ManagementTemporarily Reconfiguring a Host for Command Line Management Setting Up Telnet OperationIP Ethernet 0 section Page Basic Configuration Guide Setup OptionsDiagram of Dual-Ethernet Setup Diagram of Dual-Ethernet SetupDiagram of Single-Ethernet Setup Diagram of Single Ethernet SetupTurn off AppleTalk and IPX optional Configuration Using CompatiViewVPN Client Tunnel Settings Dual Ethernet Single Ethernet TCP/IP Routing Ethernet IP Connection Ethernet Dual Ethernet Set basic IP parameters for EthernetSingle Ethernet Turn IP off on Ethernet Dual Ethernet Static Route Single Ethernet Static Route Basic Configuration Guide Set an IP Gateway for EthernetIP Static Routes Basic Configuration Guide Basic Configuration Guide Set an IPSec Gateway IPSec GatewaySet an IKE Policy IKE PolicyBasic Configuration Guide Set up VPN Group Configurations VPN Group Configuration General TabVPN Group Configuration IKE Configuration Tab IKE Configuration Transform List Basic Configuration Guide Basic Configuration Guide VPN Group Configuration IPX Connection Tab VPN User Basic Configuration Guide Set up VPN UsersVPN User Configuration Save the configuration to a file and download to the device Set up the Tunnel Partner Add a VPN PortAdd VPN Port Tunnel Partner VPN #Set up Key Management IKE Key ManagementIKE Configuration Transform List Save the configuration to a file and download to the device Basic Configuration Using Command Line ExampleSingle Ethernet Setup Example Edit IP Static Append Configure general Basic Configuration Guide Set up VPN Group Configurations Configure vpn group basic vpn config Save the Configuration and download it to the device Use the configure command to add a VPN Port Configure tunnel partner vpn Suggested for IPX IPX ProtocolRequired for IPX Setting up Radius Authentication Setting the IntraPort for a Radius ServerAppleTalk Protocol Required for AppleTalkRadius Server User Authentication Settings Setting up SecurID Authentication Setting the IntraPort for an ACE/Server ACE/Server SettingsSaving a Configuration File to Flash ROM Page Appendix a Shipping Defaults Ethernet InterfacesAppendix B Connector and Cable Pin Outs Appendix B Connector and Cable Pin OutsAppendix C Security Dynamics ACE/Server Information Page IntraPort 2/2+ VPN Access Servers LED Patterns IntraPort 2+ Connections/Users LEDs Appendix D LED Patterns and Test Switch SettingsIntraPort 2 Connections/Users LEDs IntraPort 2+ Special Indicators IntraPort 2/2+ VPN Access Server Switch SettingsIntraPort 2 Special Indicators Page Appendix E Downloading Software From Compatible Systems Compatible Systems WWW ServerPage Appendix F Terms Conditions Appendix F Terms and ConditionsPage Appendix F Terms and Conditions

2+, 2 specifications

Compatible Systems 2,2+ is a cutting-edge framework designed to enhance interoperability and compatibility across various technological platforms and systems. Built on a robust foundation, this system aims to simplify the integration of old and new technologies, ensuring organizations can effectively leverage their existing infrastructures while embracing innovations.

One of the primary features of Compatible Systems 2,2+ is its modular architecture. This design allows organizations to implement only the components they need, significantly reducing costs and complexities associated with full-scale system overhauls. It promotes flexibility, enabling businesses to customize solutions according to their specific operational requirements without compromising performance or security.

Another standout characteristic is its adherence to open standards. By supporting widely accepted protocols and formats, Compatible Systems 2,2+ significantly reduces the barriers to integration. This feature facilitates communication between different systems and devices, enabling seamless data exchange and promoting collaboration across varied platforms. Organizations can easily connect disparate systems, fostering a unified operational environment.

The introduction of advanced connectivity features, such as API management and microservices architecture, distinguishes Compatible Systems 2,2+ from traditional systems. This technology allows for more granular control over data flows and interactions, enhancing agility in development and deployment. Organizations can quickly adapt to changing market demands, ensuring they remain competitive in a fast-paced digital landscape.

Security is another critical concern addressed by Compatible Systems 2,2+. The framework incorporates robust security protocols to safeguard data integrity and protect against unauthorized access. With features such as encryption, authentication, and authorization mechanisms, organizations can trust that their sensitive information is well-protected.

Moreover, Compatible Systems 2,2+ includes comprehensive support for analytics and monitoring. By integrating data analytics tools, this system allows organizations to gain insights into system performance and user behavior, facilitating informed decision-making. This capability not only enhances operational efficiency but also aids in predictive maintenance, reducing downtime and improving overall productivity.

In conclusion, Compatible Systems 2,2+ presents a versatile and secure solution for organizations looking to enhance compatibility and interoperability across their technological ecosystems. With its modular architecture, support for open standards, advanced connectivity features, and robust security measures, it stands as a leading choice for businesses aiming to navigate the complexities of modern technology integration successfully. Embracing Compatible Systems 2,2+ can empower organizations to innovate while preserving their valuable technological investments.
Top Page Image Contents