Limited Mode

You can program your remote control in Limited Mode to keep from accidentally changing the channel on your TV or VCR. When you use the remote to control your TV in Limited Mode, you will only be able to use the POWER, MUTE, and VOLUME buttons to control your TV. Also, when you use the remote to control your VCR in Limited Mode, you will only be able to use the POWER and VCR function buttons. The section Programming Using the Equipment Code Tables has a step that tells the remote control to go into Limited Mode. Also, a quick way to put the remote in Limited Mode is on page C-6.

Note: Limited Mode can not be used with audio amplifiers.

PROGRAMMING USING EQUIPMENT CODE TABLES

You can set up the remote to control other equipment using the equipment codes listed on page 12 and the modes as shown on page 2.

Instructions

Additional Information

1Turn the equipment on.

2Find the brand name of the equipment in the tables starting on page 12.

3Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.

4For AUX mode only. Press 0 for a second TV, or 1 for a second VCR, or 2 for a tuner, or amplifier.

Use the equipment’s front panel buttons or its remote control.

If the brand isn’t listed, see Scanning for Equipment Codes on page 4.

For example, hold the TV mode button for a TV until all of the other mode buttons light. When you let go, TV will flash.

This step is for programming the kind of equipment that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 5.

5Enter one of the three-digit equipment codes from the table using the number buttons.

The three-digit equipment code should be for the brand name of your equipment that you found in step 2.