Instructions | Additional Information |
6If you want to program Limited Mode, press 1. If not, skip to step 7.
7Press POUND (#).
8Press POWER to turn off the equipment. If the equip- ment does not turn off, go to step 10.
9Turn the equipment back on and try some other but- tons to make sure they work. If the code works for other buttons, stop here.
10If the code doesn’t work, redo steps 3 through 9 with another equipment code from the tables.
11If you can’t find a code that works try, Scanning for Equipment Codes that follows.
See Limited Mode on page 3 for more information.
If you entered the code correctly, the mode button flashes three times.
If the code works, the equipment should turn off.
Sometimes POWER works when other buttons don’t.
Try every code listed for your brand until one works for your equipment.
SCANNING FOR EQUIPMENT CODES
Instructions | Additional Information |
1 Turn the equipment on.
Use the equipment’s front panel buttons or its remote control.
2Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.
For example, hold TV for a TV until all of the other mode buttons light. When you let go, TV will flash.
4