Instructions | Additional Information |
10If the code worked for other buttons, select Yes and continue with step 11. If the code did not work, select No and repeat steps 6 through 9 for the next code for your brand.
11On the Home screen, confirm that the device’s brand name you found in step 5 is in parentheses after a
12
13If you wish to change the device used to control audio volume: Select the Volume option from the Remote Control settings screen and follow the steps in Switching Between TV and Amplifier Volume Con- trol on page 8.
Choose the code that provides the remote with support for the most device functions. If you wish to verify the support of volume and mute functions, go to step 13.
You can program the remote to control your TV in TV mode and other devices in DVD and AUX modes. Repeat these instructions for each mode.
Auto Tune is a feature to help keep a TV2 tuned to satellite programming. When enabled, pressing the SAT button on a linked TV2 remote tunes that TV automatically to a specified channel or input (source).
If you have connected your ViP922 DVR receiver’s audio output(s) to an audio amplifier or A/V receiver, then you may want to change which device controls volume and mute from the default of the TV to one of these AUX devices you have programmed in AUX mode.
ENTERING EQUIPMENT CODES
Instructions | Additional Information |
|
|
1 Turn your equipment on. | Use your equipment’s front |
| panel buttons or its own |
| original remote control. |
5