Sanyo DRW-500 Setting AV1 Select and AV2 Select, AV Select --- AV1 Select & AV2 Select

AV Select

When the 1st AV input (AV1 IN) or 2nd AV input (AV2 IN) jacks are connected, you must set as follows:

Preparations

(AV Select ---> AV1 Select & AV2 Select)

1. Select “Setup Menu” in “Menu” screen. See page E22.

Menu

Play/Edit Disc	Recording Setup
Record Program	DVD Control
	4
Setup Menu	a General
	Video

Audio

AV Select

Press SETUP to exit

2.Press [ENTER] (or [a]). “Recording Setup” is highlighted.

3.Press [p] to select “AV Select”.

4.Press [ENTER] (or [a]). “AV Select” screen appears.

AV Select

AV1 Select	a	Video
AV2 Select	5	S-Video

Press SETUP to exit Current selection

SETUP

4, 5, a, b

ENTER

Setting “AV1 Select” and “AV2 Select”

1.Press [p] or [o] to select “AV1 Select” or “AV2 Select”. AV1 Select: When AV1 IN jacks are used

AV2 Select: When AV2 IN jacks are used

2.Press [ENTER] (or [a]) to select the sub menu.

	AV Select
AV1 Select	b Video
	5
AV2 Select	S-Video

Press SETUP to exit Current selection

3. Press [p] or [o] to select the video input jack.

Video: Using VIDEO input jack

S-Video: Using S-VIDEO input jack

4.Press [ENTER]. “√” appears.

5.Press [b] to return to “AV1 Select” or “AV2 Select”.

6.Repeat steps 1 ~ 5 as necessary.

Notes:

•Press [b] again to return to “Menu” screen.

•Press [SETUP] to close the screen.

Need help? Call 1-800-813-3435

-E32-