Timer Recording
Note:
This unit uses the International Time System
1.Set the program(s) first.
(See “Record Status” on page E33. )
2.Open “My Record List” screen and confirm the program to be recorded. Make corrections if necessary.
(See “Record List” on page E37. ) Example:
My Record List
Title | Date | Start | Source |
b Iove | 2004/05/03 | 21:30 | CATV 012 |
news | 2004/05/01 | 17:05 | CATV 010 5 |
the king | 2004/05/10 | 10:00 | CATV 024 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press SETUP to exit
3.Press [SETUP] to close “My Record List” screen.
4.Press [POWER] to turn the power off. Recording standby mode is set.
• The present time and “0” appear on the FL display.
•When the timer ON time arrives, the power turns on automatically and recording starts.
•When the timer OFF time arrives, the power turns off automatically and it is set to the standby mode.
Notes:
•If there is not enough space on the disc, as much of the program as possible will be recorded on the disc.
•Be sure to check and/or change the disc after every timer recording has been completed.
Recording from an External Equipment (VCR, etc.)
•Connect a VCR or other equipment to the AV1 IN or AV2 IN jacks first. See page E15.
•Select “Video” or
1.Load the disc.
2.Press [INPUT] repeatedly to select “VIDEO1 IN” or “VIDEO2 IN” for the equipment you have connected.
• “VIDEO1” or “VIDEO2” appears on the FL display.
3.Start playback on the other equipment.
4.Press [RECORD m] at the point you want to start recording. Recording starts.
To pause recording
Press [k]. Press it again to restart recording.
To stop recording
Press [n].
For more details, see page E41.
CAUTION:
Almost all videos and DVD softwares on sale have a copy- protection. You cannot record them using this unit.
Video Games cannot be recorded.
POWER
INPUT
SETUP
k (Pause)
n (Stop)
RECORD m
Need help? Call