Sanyo DRW-500 instruction manual Record Status, Setting Record Time

Page 34

Record Status

The program timer switches the unit on and off to record a TV program at a preset time.

You can program a total of 15 times slots to be recorded, during the next one-year period.

These settings are retained in the program memory and will repeat as long as a recordable disc is loaded in the unit.

Note:

The clock must be set before this setting. See “SETTING THE CLOCK” on page E18.

Preparations

(Record Status ---> Record Time, Record Day, Input Source, TV, Record Mode & Title)

1. Select “Record Program” in “Menu” screen. See page E22.

Menu

Play/Edit Disc

 

4

Record Program

a Record Status

 

5

Setup Menu

Record List

Press SETUP to exit

2.Press [ENTER] (or [a]). “Recording Status” is highlighted.

 

Menu

Play/Edit Disc

 

Record Program

b Record Status

 

5

Setup Menu

Record List

3.Press [ENTER] (or [a]) again. “Record Show” screen appears. Example:

 

 

Record Show

Verify the settings. Press ENTER to edit.

 

Start

End

 

Record Time

08:31

09:31

 

Record Day

 

2004/05/01

Input Source

Tuner

 

 

TV

10

 

 

Record Mode

SP

 

 

Title

20040501

 

 

Press SETUP to exit

Done

Cancel

4.Press [o] or [p] to select the item.

Record Time ===> See the right column. Record Day ===> See page E34.

Input Source

===>

See page E35.

TV

===>

See page E35.

Record Mode

===>

See page E36.

Title

===>

See page E36.

Note:

After all settings are completed, press [p] to select “Done”, and then press [ENTER].

Setting “Record Time”

Note:

If you have set “Record Status” already, open “Record List” to check the list. Remove the unnecessary program from the list first. See page E37.

1.Select “Record Time”. Example:

 

 

Record Show

Verify the settings. Press ENTER to edit.

 

Start

End

 

Record Time

08:31

09:31

 

Record Day

 

2004/05/01

Input Source

Tuner

 

 

TV

10

 

 

Record Mode

SP

 

 

Title

20040501

 

 

Press SETUP to exit

Done

Cancel

2.Press [ENTER].

The start and end time screen appears. Example:

Record Show

Press 45 or use the number keys on remote to change settings. Use the International Time for the hour(00-23).

Hour

Minute

Hour

Minute

 

4

 

 

 

 

Start 08

: 31

End 09

: 31

Done

5

 

 

 

Back

 

 

 

 

Press SETUP to exit

3.Press [o] or [p] (or the number buttons on the remote control) to set the start and end times.

Note:

Press [a] or [b] to move the cursor.

4.Press [a] to select “Done”.

5.Press [ENTER].

The record time is set. The screen returns. Example:

 

 

Record Show

Verify the settings. Press ENTER to edit.

 

Start

End

 

Record Time

21:30

22:00

 

Record Day

 

2004/05/01

Input Source

Tuner

 

 

TV

10

 

 

Record Mode

SP

 

 

Title

20040501

 

 

Press SETUP to exit

Done

Cancel

Note:

To cancel the setting, select “Back” or “Cancel” in the screen, and then press [ENTER].

-E33-

Image 34
Contents SANYO’S HELP-LINE Please Read This ManualContents Important Safety Instructions Example of Antenna Grounding AS PER Safety Certification AccessoriesFL Display ControlsFront Panel Back PanelInserting batteries Remote ControlRemote control range Important NoteTo reduce the volume temporarily muting For Safe and Efficient OperationBefore Connection Connecting the Antenna CableBasic Connection If you use SeeChannel Switch Setting Example Basic Antenna/Cable ConnectionsExample Connecting a Cable Box Partial back panelExample Connecting to the S-VIDEO OUT jack Connecting the Video CableExample Connecting to the Video OUT jack Example Connecting to the Component Video OUT jacksFor Video connection, see page E11 Connecting the Audio CablesExample Connecting to your TV or Audio System Yellow plug is used for video connection. See page E11To enjoy Dolby Digital or DTS sound DVD recorder To Audio OUT jacks Partial back panelConnecting the Power Cord Video cable WhiteL To AV1 in jacks Example Connection for recording from other equipmentSee AV Select on page E32 Not suppliedExample Connection for recording to other equipment Connecting to a Satellite Receiver or a Cable Box Preparations Setting the ClockImportant Note To Set the ClockSetting Channel Setup Tuner SettingTuner Select Channel List Auto CH ScanChannel List Modify Channel MTS Multi-channel TV Sound SelectSetup Power Before Initial SettingCommon Procedure Important NoteSetting Record Mode Initial SettingsRecording Setup Recording Setup --- Record Mode & Auto ChapterSetting Auto Chapter Setting Disc Menu DVD ControlSetting Audio Setting Angle MarkSetting Subtitle Choosing Rating Setting Parental ControlIf you forget the password… Parental Control SetSet Password +10General Setting Menu LanguageGeneral Setup General --- Menu LanguageVideo Setting TV DisplayVideo Setup Video --- TV DisplayAudio Setup Setting Digital OutSetting DRC Dynamic Range Control Audio PreparationsAV Select --- AV1 Select & AV2 Select Setting AV1 Select and AV2 SelectAV Select AV SelectSetting Record Time Record StatusImportant Information Setting Record DayNumber Buttons Important Note Setting Input Source Setting TVSetting Title E36Record List Playable Discs Disc InformationRecordable Discs Disc type and logo markDVD-Video Disc Handling, Storing and Cleaning DiscsRegion Number DVD-Video disc only Audio CD DiscRecording OPEN/CLOSE PowerREC Mode See Recordable Discs on page E38Pause Stop Number Buttons REC Mode Record m To pause recordingRecording TV Programs Display Channel +Recording stereo program and SAP Second Audio Program To watch another TV while recordingTV/DVD Audio See MTS Multi-channel TV Sound Select on page E21Recording from an External Equipment VCR, etc Timer RecordingPower Input Setup Pause Stop Record mDisc Playback Basic Playback Stopping PlaybackChapter Track Skip Selecting a Top MenuSelecting a DVD Menu Title or Chapter SearchFast Playback Time Search CDTrack Search CD Slow Motion Playback DVD-Video DVD+RW DVD+RRepeat Playback Picture ZoomViewing from a Desired Camera Angle Multi-Angle DVD-Video Designated Range Repeat Playback A-B RepeatSubtitle Audio Selecting Subtitle LanguageSelecting Audio Soundtrack Language Multi-Language Changing the audio channel outputTo Check the Disc Playing Time Shuffle Playback CDProgrammed Playback CD Shuffle ProgBefore Starting MP3 CD OperationMP3 CD Playback To Check the Elapsed Playing Time PauseFile Skip Pause Stop PlayPicture Disc Operation Kodak Picture CD PlaybackIf the disc is mixed with MP3 and Jpeg files… Jpeg CD PlaybackA, b Enter Play Pause Stop Play Title DVD+RW DVD+R EditingCheck carefully before proceeding Play/Edit Titles Press a or b to select the title firstTitle Delete DVD+RW Edit Title Rename DVD+RW DVD+RFormat Disc DVD+RW Check carefully before proceedingEdit Disc Erase Disc DVD+RWRename Disc DVD+RW DVD+R Protect Disc DVD+RWOperation Troubleshooting GuidePower PictureSound Recording/Timer RecordingPlayback Specifications MaintenanceCleaning the cabinet Exclusions Weekdays 730 AM 400 PM Central TimeObligations Model No Serial No Date of Purchase