Sanyo DRW-500 Recording, OPEN/CLOSE Power, REC Mode, See Recordable Discs on page E38

Page 41

RECORDING

Preparations

This instruction manual explains the basic instruction of this unit using the remote control unit.

Turn on the TV and select the video input source. Refer to your TV’s owner manual.

Check that the disc has enough available space for recording.

Set “Record Mode” and “Auto Chapter” (See pages E23 and E24).

Select “Stereo” in “MTS (Multi-channel TV Sound) Select” on page E21.

Do not touch the disc tray while it is moving.

Never place anything except a disc on the disc tray. Foreign objects can damage the unit.

Do not apply excessive force to the disc tray.

Only one disc must be placed on the disc tray at a time.

When operation buttons are pressed, that operation is displayed on the TV screen. The display turns off after several seconds.

1.Press [POWER] to turn the power on.

“SANYO” logo appears on the TV screen.

“POWER ON” ---> “LOADING” ---> “NO DISC” appears on the FL display.

2.Press [OPEN/CLOSE] to open the disc tray.

“OPEN” appears.

Note:

To open or close the disc tray, be sure to press [OPEN/ CLOSE]. Do not press the disc tray with your hand.

3.Place a DVD+RW or DVD+R disc (label facing up) to be recorded on the disc tray.

See “Recordable Discs” on page E38.

OPEN/CLOSEPOWER

4. Press [OPEN/CLOSE] again to close the disc tray .

Please wait until “CLOSE” ---> “DISC LOADING” ---> “STOP” disappears on the TV screen.

• If a blank disc is used for first time, “SANYO” logo screen remains.

• If the disc is recorded once before, a title menu screen may appear.

• “DVD RW” (or “DVD”) and “SP” (or “HQ”, “LP”, “EP” or “EP+”) appear on the FL display.

• Blank DVD+RWs may take a while longer before “STOP” disappears on the TV screen.

5. Press [REC MODE] to select the Record Mode (“HQ”, “SP” “LP”, “EP” or “EP+”).

For more details, please refer to “Setting Record Mode” on page E23.

REC MODE

Need help? Call 1-800-813-3435

-E40-

Image 41
Contents Please Read This Manual SANYO’S HELP-LINEContents Important Safety Instructions Example of Antenna Grounding AS PER Accessories Safety CertificationFront Panel ControlsFL Display Back PanelRemote control range Remote ControlInserting batteries Important NoteFor Safe and Efficient Operation To reduce the volume temporarily mutingBasic Connection Connecting the Antenna CableBefore Connection If you use SeeExample Basic Antenna/Cable Connections Channel Switch SettingPartial back panel Example Connecting a Cable BoxExample Connecting to the Video OUT jack Connecting the Video CableExample Connecting to the S-VIDEO OUT jack Example Connecting to the Component Video OUT jacksExample Connecting to your TV or Audio System Connecting the Audio CablesFor Video connection, see page E11 Yellow plug is used for video connection. See page E11DVD recorder To Audio OUT jacks Partial back panel To enjoy Dolby Digital or DTS soundConnecting the Power Cord See AV Select on page E32 Example Connection for recording from other equipmentVideo cable WhiteL To AV1 in jacks Not suppliedExample Connection for recording to other equipment Connecting to a Satellite Receiver or a Cable Box Important Note Setting the ClockPreparations To Set the ClockTuner Select Tuner SettingSetting Channel Setup Channel List Auto CH ScanChannel List MTS Multi-channel TV Sound Select Modify ChannelCommon Procedure Before Initial SettingSetup Power Important NoteRecording Setup Initial SettingsSetting Record Mode Recording Setup --- Record Mode & Auto ChapterSetting Auto Chapter DVD Control Setting Disc MenuSetting Subtitle Setting Angle MarkSetting Audio If you forget the password… Setting Parental ControlChoosing Rating Parental Control Set+10 Set PasswordGeneral Setup Setting Menu LanguageGeneral General --- Menu LanguageVideo Setup Setting TV DisplayVideo Video --- TV DisplaySetting DRC Dynamic Range Control Setting Digital OutAudio Setup Audio PreparationsAV Select Setting AV1 Select and AV2 SelectAV Select --- AV1 Select & AV2 Select AV SelectRecord Status Setting Record TimeNumber Buttons Important Note Setting Record DayImportant Information Setting TV Setting Input SourceE36 Setting TitleRecord List Recordable Discs Disc InformationPlayable Discs Disc type and logo markRegion Number DVD-Video disc only Handling, Storing and Cleaning DiscsDVD-Video Disc Audio CD DiscREC Mode OPEN/CLOSE PowerRecording See Recordable Discs on page E38Recording TV Programs REC Mode Record m To pause recordingPause Stop Number Buttons Display Channel +TV/DVD Audio To watch another TV while recordingRecording stereo program and SAP Second Audio Program See MTS Multi-channel TV Sound Select on page E21Power Input Setup Timer RecordingRecording from an External Equipment VCR, etc Pause Stop Record mDisc Playback Stopping Playback Basic PlaybackSelecting a DVD Menu Selecting a Top MenuChapter Track Skip Title or Chapter SearchTrack Search CD Time Search CDFast Playback Slow Motion Playback DVD-Video DVD+RW DVD+RViewing from a Desired Camera Angle Multi-Angle DVD-Video Picture ZoomRepeat Playback Designated Range Repeat Playback A-B RepeatSelecting Audio Soundtrack Language Multi-Language Selecting Subtitle LanguageSubtitle Audio Changing the audio channel outputProgrammed Playback CD Shuffle Playback CDTo Check the Disc Playing Time Shuffle ProgMP3 CD Playback MP3 CD OperationBefore Starting File Skip PauseTo Check the Elapsed Playing Time Pause Stop PlayKodak Picture CD Playback Picture Disc OperationA, b Enter Play Pause Stop Jpeg CD PlaybackIf the disc is mixed with MP3 and Jpeg files… Check carefully before proceeding Play/Edit Titles EditingPlay Title DVD+RW DVD+R Press a or b to select the title firstEdit Title Rename DVD+RW DVD+R Title Delete DVD+RWEdit Disc Check carefully before proceedingFormat Disc DVD+RW Erase Disc DVD+RWProtect Disc DVD+RW Rename Disc DVD+RW DVD+RPower Troubleshooting GuideOperation PicturePlayback Recording/Timer RecordingSound Cleaning the cabinet MaintenanceSpecifications Obligations Weekdays 730 AM 400 PM Central TimeExclusions Model No Serial No Date of Purchase