Pelco DX4104 Series manual PTZ Control, PTZ mode Opens and closes the camera iris

PTZ CONTROL

The PTZ control can be used to operate and configure cameras that have been configured for PTZ operation, including those that support Pelco P and Pelco D protocols and third-party dome cameras.

Figure 4. PTZ Control

	ZOOM: Zooms the camera in and out.
	FOCUS: Performs two functions:
	• In PTZ mode: Adjusts the camera focus.
	• In camera menu: FOCUS+ and FOCUS- is used to navigating up and down the camera menu choices.
	IRIS: Performs two functions:
	• In PTZ mode: Opens and closes the camera iris.
	• In camera menu: IRIS plus (+) selects an item. IRIS minus (-) exits an option setting. In the menu, the IRIS button
	moves the cursor to EXIT.
	Keypad: Use the keypad to enter presets or pattern numbers.
PGM	Program: Accesses the camera programming mode.
CLR	Clear: Deletes a programmed preset, pattern, or tour.
	PRESET: Performs three functions:
PRESET	• In preset programming mode: Stores the preset in the selected memory location.
	• In PTZ mode: Activates a preset.
	• Tour: Starts a a preset tour.
	PATTERN: Performs two functions:
PATTERN	• Pattern programming mode: Stores the pattern in the selected memory location.
	• PTZ mode: Activates a pattern.
AUX	Auxiliary: Unsupported at this time.
	SET: Performs two functions:
SET	• Enters PTZ programming mode.
	• Exits PTZ programming mode.

16 C4632M (11/09)