Alloy Computer Products POE120 Series Technical Specifications Standards, UTP Cable, Fibre Cable

Page 9

11.Technical Specifications

Standards:

IEEE 802.3u 10/100Base-TX, 100Base-FX

 

IEEE 802.3af Power Over Ethernet

UTP Cable:

Cat. 5 cable up to 100m

Fibre Cable:

50/125, 62.5/125 or 100/140 µm multi mode

 

8.3/125, 8.7/125, 9/125 or 10/125 µm single mode

Power Reception

“Endpoint” Via TP Pins 1, 2, 3 and 6

Support:

”Midspan” Via TP pins 4, 5, 7 and 8

LED Indicators:

Power, POE, TP LNK/ACT, 100, FX LNK/ACT,

 

FDX/COL

Data Transfer Rate:

100Mbbps – 148,800pps

 

10Mbps – 14,880pps

Flow Control:

IEEE 802.3x compliant for Full Duplex

 

Backpressure flow control for Half Duplex

Power Requirements:

60mA@-48VDC from IEEE 802.3af PSE or POE

 

Injector

Ambient Temperature:

0º to 50º C

Humidity:

5% to 90%

Dimensions:

26.2(H) x 70.3(W) x 94(D) mm

Complies with C-Tick, FCC Part 15 Class A and CE Mark

Image 9
Contents POE120 Series Model 100Mbps Fibre TransceiverSingle Fibre Model TX, RX Wavelength Default Auto Fibre Default 100FDX PortPort POE120 Series to PSE Device or POE Injector WDM Single Fibre Model Pairs used for receiving power over Ethernet CableNormal Status via a pair of LFP’s Link Failure PropagationDC Jack and AC-DC Power Converter LED DescriptionColour Function SC/ST Converter Models Power Reception Technical Specifications StandardsLED Indicators Power Requirements