Sennheiser RS4200 manual Putting the system into operation, Setting up the transmitter

Page 11

Putting the system into operation

Setting up the transmitter

Choose a suitable place near your sound source (e.g. TV).

Note:

y Do not place the transmitter close to metal objects such as shelf bars, reinforced concrete walls, etc. as this can decrease the transmitter’s range.

y It is not necessary that the transmitter and stethoset receiver are in a direct line of sight, so you can move around freely in the home or outside in the garden.

y One transmitter can be used to transmit to several receivers on the same frequency.

Connecting the transmitter to the sound source

Plug in one end of the connecting cable to the blue AUDIO socket on the transmitter.

Check the connection possibilities of your sound source (e.g. TV).

A		B	C	D
TV		TV	AV	No socket
	L	R
Headphone	RCA sockets		SCART socket	External
socket				microphone

6

Image 11

Contents Instructions for use RS4200Page Page Page Page Contents Improper use Safety instructionsIntended use of the system RS 4200 stethoset receiver system RS 4200-2 product variant Delivery includesLED indications see inside cover Operating controlsReceiver see inside cover Transmitter see inside coverPutting the system into operation Setting up the transmitterConnecting the transmitter to the sound source Connecting the transmitter via the RCA sockets Connecting the transmitter via the headphone socketUsing an external microphone Connecting the transmitter to the mainsConnecting the transmitter via the Scart socket Inserting and removing the receiver’s rechargeable battery Switching the stehoset receiver on Using the system componentsSwitching the transmitter on Changing the transmission and receiver channel Adjusting the volumeAutomatic transmitter search tuning Storing and charging the receiver Adjusting the balanceEnhancing speech intelligibility LEDs on the transmitter Meaning of the LEDs and acoustic signalsAcoustic signals of the receiver Acoustic signal Meaning CommentaryCleaning the ear cushions Care and maintenanceCleaning the system Problem Possible cause If problems occurConnector assignment AccessoriesTransmitter SpecificationsBatteries or rechargeable batteries Warranty regulationsManufacturer Declarations CE Declaration of Conformity