Inserting and removing the receiver’s rechargeable battery
Insert the battery into the compartment as shown on the left. Make sure that the battery is inserted correctly.
To remove the battery, use the finger catch projection to pull the battery out of the receiver.
Note:
yThe receiver is delivered with the battery inserted.
y Before you use the rechargeable battery for the first time, charge it until the LED lights up green (see “Storing and charging the receiver” on page 12). This can take a maximum of 3 hours.
Inserting a spare rechargeable battery into the transmitter’s charging compartment
You can charge a spare battery (not included) in the charging compartment at the side of the transmitter. This spare battery is not required for operating the RS 4200 but offers extended listening time while the discharged first battery is being recharged.
Insert the spare battery into the charging compartment as shown on the left.
If the battery is inserted correctly, the LED lights up
red: | The rechargeable battery is being charged. |
green: The rechargeable battery is fully charged.
9