Adjusting the volume
If the transmitter is connected to a headphones socket of
your sound source:
Adjust the volume of the sound source to a medium level. This improves the quality of wireless sound transmission.
Use the volume control to adjust the volume to a sufficient and comfortable level.
Automatic transmitter search tuning
Put the receiver on.
The receiver starts searching for a transmitter signal and automatically tunes itself to the last selected channel. If a transmitter signal is found, the transmitter search tuning stops and the receiver produces – depending on the selected channel – 1, 2 or 3 beeps (see “Meaning of the LEDs and acoustic signals” on page 13). The audio transmission then starts.
If the signal found is not the correct one (e.g. from another nearby system):
Briefly press the TUNE button | to continue the transmitter |
search tuning. |
|
Changing the transmission and receiver channel
If several transmitters are operated simultaneously and are very close to one another, reception can be subject to
interference (e.g. hissing).
Change the position of the channel selector switch
CHANNEL | to change the transmission channel. | |
Press the | TUNE button | to |
tuning (see previous section).
11